.

Automobile wire bellows drag grinding machine

Applicable standards:

ISO 6722, QC/T730, JIS C 3046, JASO D 611, SAEJ1128-2005, JBT 8139,TBT 1484.1-2001 Part1, EN50305, EN50306 and other standards

Main parameters:

The test stroke is greater than 10mm, the displacement of the scraping needle is 20mm+1mm, and the scraping length is 15.5±1mm

Movement frequency :50——60 cycles/min (touch screen setting)

Counter :6 bits (touch screen setting)

Test times :6 times (touch screen setting)

The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle :90

Sample length: about 750mm samples are fixed together on a steel anvil.

Weight: Basic load :4N, plus :5N, 6N, 7N, 8N, 9N, 10N, 11N(weight applied to the scraper)

Function: When the needle wears through the insulation and conductor contact, the equipment will stop

The scraping needle movement according to the "U" shape, to avoid the phenomenon that the unilateral side of the sample is easy to be scratched through.

Needle diameter :0.45mm+0.01mm(spring wire)

Test temperature monitoring function: the test environment temperature is not within the range of 23 ° C+1 ° C required by the test, the testing machine can not start or run automatically stop

Control system: servo motor, touch screen +PLC(imitation Swiss imported model)

Transmission mechanism: imported double slide rail type

Equipped with plexiglass test samples to prevent ambient temperature fluctuations can be affected by the test

企业微信截图_.png


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

G238BB Electronic Crockmeter
G238BB Electronic Crockmeter G238BB Electronic Crockmeter(Electronic rubbing colour fastness tester) G238BB Electronic Crockmeteris used for testing the color fastness of fa...
Car seat headrest insertion and withdrawal force durability tester
Car seat headrest insertion and withdrawal force durability tester Applicable standards: GB 11550-2009 "Automobile seat headrest strength requirements and test methods" : This standard specifies the test methods a...
Temperature and Humidity Alternating Test Chamber for Automotive Wires
Temperature and Humidity Alternating Test Chamber for Automotive Wires The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires....
​Carbon Arc Aging Chamber
​Carbon Arc Aging Chamber Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet rays, temperature, humidity and other factors in natural...
Protective clothing flame spread tester
Protective clothing flame spread tester Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It ...
All supplier products

Same products

Cold Glaze Stabilizer (Glazemate)
Cold Glaze Stabilizer (Glazemate) Seller: Marine Hydrocolloids Meron’s Cold Glaze Stabilizer Glazemate, a ready to use Neutral Cold Glaze Stabiliser, whic...
Pectin
Pectin Seller: Marine Hydrocolloids Meron Pectin is a structural polysaccharide of the cell wall of plants, Commercial pectin is comm...
Milk Shake Stabilizer
Milk Shake Stabilizer Seller: Marine Hydrocolloids Meron’s Milk Shake StabilizerOur Milkshake Stabilizer has been designed to provide creamy m...
Flavoured Milk Stabilizer
Flavoured Milk Stabilizer Seller: Marine Hydrocolloids Meron’s Flavoured Milk StabilizerFlavoured milk drinks are sweetened dairy drinks, typicall...
Ice Cream Stabilizer
Ice Cream Stabilizer Seller: Marine Hydrocolloids Meron’s IceCream Stabilizer is a 100% vegan blend developed to not only enhance the texture...