Wire bending tester
Product Introduction:
Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thickness, and fixed in the fixture with adjusted spacing. After rotating the wheel 200 times, the degree of damage, cracking, crack and conductor strand breakage rate are checked. It has the characteristics of simple operation and excellent performance, can be positive and negative operation, and can be set to automatically stop after reaching the number of times.
Technical parameters:
1, fixture action: manual
2, fixture spacing: 0——500mm adjustable
3, the total number of times: 0-999999 times can be manually set
4. Test rate: 20 times/min
5, off-center: 50, 75, 100, 150mm
6, the diameter of the parallel section of the sample: φ4mm, φ6mm, φ8mm, φ10mm, φ12mm,φ15mm, φ18mm, φ20mm
Send product request
Other supplier products
 |
Slip Resistance Tester | Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequent... |
 |
Mask Leakage Tester | Synthetic Blood Penetration TesterThe Mask Integrity Test Accessory (Qinsun) works in tandem with the CBRN Mask Protection Assessment Test System o... |
 |
Temperature and Humidity Alternating Test Chamber for Automotive Wires | The temperature and humidity alternating test chamber for automotive wires conducts temperature and humidity alternating tests on automotive wires.... |
 |
Fabric Negative-ion Concentration Tester | The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
 |
Fabric Bursting Strength Tester | Bursting Strength Tester, to test the bursting strength of paper, woven or knitted fabrics, non-woven, fabric and board by the of hydraulic load un... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
