.

Automobile wire cyclic bending testing machine

In terms of technical parameters: The swing angle can reach 180 degrees clockwise or counter - clockwise. It is also possible to continuously set any specified angle. The speed ranges from 10 to 60 times per minute, with an error of ±1 time. The counter range is from 1 to 999.999 and can be preset. There are 3 sets of test stations. One weight each of 2.5N, 3.75N, 5N, and 7.5N is provided. It has the functions of wire - break stop and data retention. The test voltage is 24V. The power supply requirement is AC220V (with a fluctuation range of ±10%), and the switching power supply is DC24V/5A. The overall weight of the machine is 50KG. The R - angle of the test fixture is determined according to the wire specifications. For example, for a wire with a cross - sectional area of 0.5mm² and an outer diameter of 1.5mm, the R - value of the fixture is 3.75. It also covers various specifications such as R7.2 and R9.6. These parameters provide specific standards and conditions for the bending performance


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Oxide film abrasive tester
Oxide film abrasive tester Applicable standards: GB/T 12967: This standard specifies in detail the test method for determining the average wear resistance of aluminum and al...
Fabric Heat Conduction Performance Tester
Fabric Heat Conduction Performance Tester The instrument is mainly used for the determination of textiles, fire supplies and other materials thermal conductivity.StandardsEN 367-1992 Protec...
Heel Impact Tester
Heel Impact Tester Heel Impact Tester is used to determine the impact strength of heels of ladies’shoes. Application: This Heel Impact Tester is used to det...
Floorings Thermal Radiation Panel Tester
Floorings Thermal Radiation Panel Tester The critical radiation flux is the main parameter to investigate the fire hazard of the flooring material. It characterizes the combustion spread c...
Car seat headrest static strength tester
Car seat headrest static strength tester Applicable standards: GB 11550-2009 "Automobile seat headrest strength requirements and test methods" : This standard specifies the static strengt...
All supplier products

Same products

OPE wax used as lubricant in polymer processing
OPE wax used as lubricant in polymer processing Seller: Syntop chemical Co.,Ltd. Oxidized polyethylene wax is a low-molecular-weight polymer containing polar carbonyl and hydroxy...
Frameless Motor Core
Frameless Motor Core Seller: 855082 Frameless Motor Core Yuma Precision offers cutting-edge frameless motor cores, designed for indu...
Permanent Magnet Motor Core
Permanent Magnet Motor Core Seller: 855082 Permanent Magnet Motor Core Permanent Magnet Motor Core- High-Efficiency Motor Solutions Yuma P...
Linear Motor Core
Linear Motor Core Seller: 855082 Linear Motor Core Yuma Precisionspecializes in manufacturing high-quality Linear Motor Coresdesi...
China manufacturer Liquid level meter CYJ-1-150KP for power generation
China manufacturer Liquid level meter CYJ-1-150KP for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Liquid level meter CYJ-1-150KP for power generation The use of advanced techn...