High - voltage DC Stability Tester
The high - voltage DC stability tester is suitable for testing DC high - voltage within the range of 0.1 - 5.00KV and continuously recording the values of high - voltage and leakage current of the test samples.
Main parameters:
(1) Power: 500VA (2) Power supply: 220V/50HZ (3) High - voltage output range: 0 - 5KV (AC/DC) (4) Leakage current range: 0 - 2/20/100mA (AC), 0 - 2/20mA (DC) (5) Accuracy: ±(3% + 3counts) (6) Test time setting range: 1μs - 999.9S/M/H (7) Voltage adjustment mode: Manual adjustment (8) A digital voltmeter with data communication function (range: 0 - 5.00KV) and a digital ammeter (0.1μA - 3.0mA) are used to realize the data acquisition function of test voltage and leakage current. (9) Issues regarding high - voltage and grounding connections: A. In principle, the wire conductor of the test sample should be connected to the high - voltage, and the saltwater for testing should be grounded, which ensures testing safety. B. It is not recommended to connect the saltwater to the high - voltage and ground the conductor of the test wire. C. The testing equipment must be placed within a safety fence during testing to avoid personal safety accidents. (10) Dedicated software for recording voltage and current data is provided to achieve data storage.
Send product request
Other supplier products
 |
Convective Heat Resistance Tester | The instrument is used to determine the thermal resistance of protective clothing materials or samples and protective equipment by exposing the sam... |
 |
spray water repellency tester | Application: Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish,... |
 |
Automobile Wire Adhesion Tester | ### Main Parameters 1. Capacity: 50kg 2. Test stroke: 400mm 3. Speed: 10 - 300mm/min 4. Power system: AC servo motor 5. Volume: 80X60X170(cm) 6. We... |
 |
Schopper Abrasion Tester | Schopper Abrasion Tester Testing Standards:DIN 53863, part 2 <Abrasion test methods for textile fabrics, rotary abrasion test>, GME Standa... |
 |
Car seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006 "Automobile seats, seat fixtures and headrests strength requirements and test m... |
Same products
 |
Cold Glaze Stabilizer (Glazemate) | Seller: Marine Hydrocolloids | Meron’s Cold Glaze Stabilizer Glazemate, a ready to use Neutral Cold Glaze Stabiliser, whic... |
 |
Pectin | Seller: Marine Hydrocolloids | Meron Pectin is a structural polysaccharide of the cell wall of plants, Commercial pectin is comm... |
 |
Milk Shake Stabilizer | Seller: Marine Hydrocolloids | Meron’s Milk Shake StabilizerOur Milkshake Stabilizer has been designed to provide creamy m... |
 |
Flavoured Milk Stabilizer | Seller: Marine Hydrocolloids | Meron’s Flavoured Milk StabilizerFlavoured milk drinks are sweetened dairy drinks, typicall... |
 |
Ice Cream Stabilizer | Seller: Marine Hydrocolloids | Meron’s IceCream Stabilizer is a 100% vegan blend developed to not only enhance the texture... |
