Tool Building

• 

As a good reputation manufacturer in China, we here share the basic injection mold making process in our company:

1. Products design department provides product information to injection mold designdepartment, injection mold designers complete cost analysis in two working days, and provide to R&D manager.
2. R&D department release "Mold Making Apply" to plastic injection mold design department after confirming the project.
3. Injection mold designers organize relevant personnel to review the project based on the product information, including product structure, mold structure, cooling system, runner, slag, venting, etc. in plastic injection molding process
4. After evaluation, injection mold designers begin to design the plastic injection mold, including 3D drawing correction, 3D parting, mold parts assembly drawing, EDM drawing, electrode drawing etc., and organize relevant personnel to evaluate those drawings, then issue to plastic injection mold making department.
5. Injection mold makers evaluate and study the drawings, and order mold materials if there is no objection, otherwise, communicate with the plastic injection mold designers.
6. Injection mold makers inspect the mold materials in time after the materials arrive to injection mold factory china, and arrange technicians to do locksmith works, including turning, grinding, milling, screw holes, water carrying hole, center hole, CNC roughing, etc. The technicians should pay attention to the precision of each right-angle sides, avoid empty of the center hole and each production base, roughing margin etc. Then outsource each mold part to heat treatment promptly.
7. After heat processing, plastic injection mold maker must detect its hardness and metallurgical analysis. Generally, the core hardness 46-50HRC, for uniform distribution of 9 points, requiring its hardness differ is less than 2HRC. Metallurgical analysis should be done for the injection mold core prior to processing to make sure there is no segregation, scars, etc.
8. Electrode processing, there are fine and rough processing, fine male spark is 0.05-0.08, rough male spark is 0.2-0.3 (subject to the actual situation). Be sure to pay attention to each processing benchmarks, and detect electrodes after processing finished.
9. Before finishing, must make right angle for the mold core, the vertical degree should less than 0.02 mm, finish degree 1.6.
10. For line cutting, please note that all parts' base, enlarge 0.02mm for the insert hole and center hole as tolerance clearance, for non-standard thimble, the tolerance clearance is 0.04mm of the actual thimble size.
11. Mold core finishing, based on the benchmarks after making right-angles, typically leaves 0.02 mm die as a margin (without considering tool wearing).
12. EDM processing, process according to the drawings' size, fine 0.05-0.08, rough 0.2-0.3 (subject to the actual situation), pay attention to the benchmarks in processing, for sparks processing, the leave a margin of 0.03-0.05 mm.
13. The runner surface must be polished to achieve Ra6 or Ra7 finishing, the surface does not allow spark or knife pattern to exist.
14. Before assembling the plastic injection molding parts, the mold maker must do a comprehensive inspection for all related parts to make sure everything is in a good condition, and do cleaning and anti-rust treatment. Then fill "Mold Inspection Summary" form.
15. In tryout, injection mold designers, plastic mold makers and die casting workshop personnel should go to the site, making analysis and solution of abnormal in casting tryout, improving the plastic injection mold and die casting process according to the results, and fill "Mold Tryout Report".
16. By 100-150 cycle time, the tryout products are defect-free, the production department make production schedule, the technicians track the production processes, and feedback yield to the plastic injection mold making department.
17. After tryout, plastic injection mold making department apply for storage with the forms of "Mold Making Apply" and "Mold Making Inspection".

We are ready and looking forward to cooperate with your next project, Contact Us Now, you will be satisfied to choose us as your partner in plastic parts manufacturing process.

We are one of the professional plastic moulded products manufacturers,we provide injection mold building,injection mold tooling chinaand cheap injection molding,you can see injection molding tooling costin our website.

Other supplier products

	Acrylic Injection Molding	Acrylic is a transparent thermoplastic homopolymer known more commonly by the trade name “plexiglass.” The material is similar to polyc...
	Prototype Samples Making	Prototype samples of plastic injection molding products are basic working samples, mockups, models, or just simulations of actual products, and oth...
	Gas Assisted Injection Molding	With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an...
	PVC Injection Molding	Polyvinyl Chloride (PVC or Vinyl) is a high strength thermoplastic material widely used in applications, such as pipes, medical devices, wire and c...
	POM Plastic Injection Molding	POM Plastic Injection Molding POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-cry...

Same products

	Gasification combustion flamethrower	Seller: Jinan Baoying Machinery Technology Co., Ltd	气化炉可以直接将任何化工原料，如秸秆、木屑等可燃物转化为气体，热值高，燃烧效果好。通过应用红外燃烧技术，可以获得较高的炉膛表面温度（近 1000 摄氏度）。由于其携带能量的能力，红外辐射不需要空...
	Biomass gasification combustion flame furnace	Seller: Jinan Baoying Machinery Technology Co., Ltd	生物质气化火焰炉属于新能源，具有很强的生命力。由于植物燃气产生的原料是农作物秸秆、树木废料、食用菌渣、牛羊粪以及所有可燃物，因此是取之不尽、用之不竭的可再生资源。然而，在农村能源结构（秸秆气、液...
	Large scale sawdust pellet machine	Seller: Jinan Baoying Machinery Technology Co., Ltd	什么是木屑颗粒机？锯末颗粒机是能从锯末、玉米秸秆、花生壳、稻草、棉秸、树枝、食用菌废料、牛粪等原料生产高密度可燃生物质颗粒的专用设备。该机器产生的颗粒可用于壁炉、锅炉、气化炉和生物质发电厂。
	Vertical ring mold pellet machine manufacturer	Seller: Jinan Baoying Machinery Technology Co., Ltd	木屑颗粒机的尺寸和简单的结构使其适用于农村家庭和小型专业饲料厂。木屑颗粒机的成功开发，给供暖行业带来了质的飞跃，改变了传统的燃煤和传统的电加热。木屑颗粒机主要用于粉碎农作物秸秆并将其压制成木屑颗...
	Vertical ring mold pellet machine	Seller: 843083	锯末颗粒机是以玉米秸秆、稻草、木糠、木粉、木屑等农业废弃物为原料的专用设备。它可以从锯末、玉米秸秆、花生壳、稻草、棉花和木茎、树枝、食用蘑菇废料和牛粪中生产高密度和可燃的生物质颗粒。该机器生产的...