TCAV soil thermocouple average temperature sensor
The TCAV soil heat flux probe uses an E-type (nickel-chromium-constantan) thermocouple probe, which is used to measure the average temperature of the soil within 6~8cm below the surface of the soil. Each set of probes has four parallel probes, and each probe is used to measure the temperature at different depths.
Features:
◆ E-type thermocouple probe
◆ It can measure the average temperature of the small area of the soil in both vertical and horizontal directions
◆ 22 thermocouple configuration (a total of 4 contacts)
◆ Usually used with soil heat flux board
Technical Parameters:
◆Sensor type: nickel cadmium-constantan
◆Accuracy: ±0.3℃
◆Probe size: 2.5mm diameter×100mm length
◆ Weight: 450g
Origin: United States
Other supplier products
|
|
DD-L large diameter growth measuring instrument |
The sensor is installed on the plant through patented technology to maintain stable measurement and low pressure on the measuring point. Suitable f... |
|
|
Dynagage wrapped stem flow sensor |
Features: Using the most advanced technology to measure the stem flow to obtain the plant's water consumption determination. The energy balance pro... |
|
|
SO-421 soil oxygen sensor |
用途：SO-421的响应时间快，为14秒，专为实验室应用而设计。它配有一个用于校正温度变化的热敏电阻温度传感器和一个电阻加热器，可将膜的温度提高到环境温度以上约2度，以防止聚四氟乙烯膜上发生冷凝并阻挡传感器的扩散路径。典型应用包括在实验室实验中测量O 2，监测室内环境中的气态O 2以进行气候控... |
|
|
QT-TQ0302 Intact root sampling drill kit |
Product description: QT-TQ0302 intact root sampling drill kit can be used to collect up to 15 cm of intact soil samples. There is a replaceable ser... |
|
|
QT-03 Button Temp/RH Logger |
QT-03 series Button Temp/HR logger is used to measure the air temperature and relative humidity or soil temperature. The meter is small in size and... |
All supplier products
Same products
