Flange Nut
The proportion of wholesale flanged nuts production of DATIAN (DT) Fasteners is increasing year by year. Compared with the normal hexagon nuts, the flange nut has one more circular flange with a tooth pattern, which is firmer and has the effect of preventing loosening. The hexagon flange nut is mostly used in pipeline connections or workplaces that need to increase the contact surface of the nut.
Types Of Flange Nuts
Searching for The Right Wholesale Hex Flange Nuts
lANSI / ASME B18.2.2 Flange Nuts
lEN 1661/14218 Flange Nuts
lISO 4161 Flange Nuts
lDIN 6331/6923/977 Flange Nuts
lJIS B 1190 Flange Nuts
Flange Nut Uses
Due to the small size of flange nuts, irregular shapes, and some need to be threaded, there are some obvious defects in hot-dip galvanizing.
Although there are many defects in hot-dip galvanizing of fasteners, because of the thick coating, good bonding strength and long-term corrosion effect of hot-dip galvanized fasteners. It has always been respected in the power, communications, and transportation sectors.
Flange Nut Standard Dimensions
Click ANSI / ASME B18.2.2 Flange Nuts for more information.
Wholesale Hexagon Nut With Flange from DT
DT Hex Nut Flange Material: A3 low carbon steel 35K high-speed steel wire 45# steel 40CR 35Crmoa Hardness grade: 4, 5, 6, 8, 10, 12
Surface Treatment: The surface treatment of the hexagonal flange nuts can be generally divided into three types - color galvanized, white galvanized, black galvanized, and generally cold galvanized!
Main Flanged Nut Specifications: M5 M6 M8 M10 M12 M16 M20 (M20 and above specifications and M14 M18 flange nuts are not commonly used)
Related functions of flange nuts and general hexagon nuts are basically the same size and thread specification, but compared with hex nuts for sale, it is a one-piece gasket and nut, and there are anti-slip tooth patterns on the bottom, which increases the size of the nut and the workpiece. Compared with the combination of ordinary nut and washer, it is firmer and has greater tensile force. Generally, the specifications of common flange nuts are generally below M20. Because most flanged nuts are used on pipes and flanges, they are restricted by the workpiece, and the specifications of flange nuts are smaller than those of nuts. Some flanged nuts above M20 are mostly flat flanges, that is, there is no tooth pattern on the flange surface. Most of these wholesale fasteners are used in some special equipment and special places.
Datian Flanged Nuts FAQs
How do you install a flange nut?
First, check whether the position of the nut support surface on the back of the hexagonal flange should be parallel and smooth. If there are scratches, nicks, mud, corrosion and burrs, the flange nuts must be replaced or reworked. When installing the hex nut flange, first find the hole where the nut can be installed, then align the hole and insert it, and then slowly turn it clockwise until it is tightened.
Do flange nuts need washers?
- flange serrated nutssurface itself has the anti-slip and stop functions of the flat washer and the spring washer, there is no need to add the flat washer and the spring washer during assembly.
Are flanged nutreusable?
Fasteners are generally not allowed to be reused, especially for some high-strength and high-corrosion industries, otherwise there will be a major accident.
What Is A Flange Lock Nut?
A flange nut looks like a standard hex nut from one side, but the bottom is widened into a circular flange, creating a bell-like shape. Manufacturers serrate the bearing surface of that flange to create serrated flange nuts, allowing for a better grip on the surface of the joint.
As one of the flange nuts manufacturers, we provide m30 flange nut, din 6923 flange nuts, fastener material, nut and bolt supply, structural nuts, etc. For fastener priceor flange nut price, please feel free to contact us!
Send product request
Other supplier products
 |
ASME B 18.2.6 Heavy Hex Nuts (ASTM A563/ A194/ A194M): 2H, 2HM, 7, 7L, 7M, 8/8A, DH, 8S, 10S,10,12 | Datian Fasteners is a very advantageous fastener factoryfor ASTM A194 nuts. We can provide customers with A1942H, 2HM, 7, 7L, 7M, and A563/A563M Gr... |
 |
DIN 6331/6923/977 Flange Nuts | The DIN 6331/6923/977 flange nuts and the general m18 flange nutare basically the same in size and thread specification, but compared with the m30 ... |
 |
BS 4929-2 Locking Nuts | BS 4929-2 Locking Nuts BS4929-2 self-locking nut is a nut that is screwed together with a bolt or a screw to act as a fastening part. It is a kind... |
 |
ISO 4032/4034/4036 HEX NUTS: Class 8, 10, 12 | The ISO standard specifies type 1 hexagon nuts with thread specifications M1.6~,64 (including M64) and product grades A and B. Grade A is used for ... |
 |
DIN EN 1663 Lock Nuts | The superior anti-vibration performance of the DIN EN 1663lock nut: when the thread is tightened, the crest thread of the bolt tightly enters the 3... |
Same products
 |
Spherical Hex Nut | Seller: Handan Yidao Metal Products Co., Ltd | Product Description Hex nut is an important part of thread bar accessory, it is used in all ... |
 |
Custom Printed Rubber Wristbands/Bracelets | Seller: Yppromotion | Custom printed rubber wristbands are the wristbands of your economic quick choice. YP Promotion h... |
|
|
Flange Nut | Seller: Ningbo Datian Fastener Co.,Ltd. | The proportion of wholesale flanged nuts production of DATIAN (DT) Fasteners is increasing year b... |
 |
RX-510 HD HDMI Mechanic Simultaneous Microscope Camera | Seller: Shenzhen PHONEFIX technology Co.,Ltd | Mechanic microscope camera RX-510 HD HDMI input digital electronic simultaneous microscope camera... |
 |
DIN 314 Wing Nuts | Seller: Ningbo Datian Fastener Co.,Ltd. | DIN 314 big wing nuts is easy to install and disassemble, and it can be screwed directly by hand,... |
