Rock Wool Production Line Manufacturing Process and Matters Needing Attention in Use
Recently, we have sorted out a note on the use of rock wool production lineproducts, hoping to help you correctly use the rock wool insulation products.
Ⅰ. Why does Insulation on External Wall crack in the process of rock wool production linesmanufacturing products
Most of this is due to improper installation of Insulation on External Wall. If it is not installed properly, when it encounters the change of temperature difference or is affected by the outside sun and rain, its finishing layer will crack. The appearance of cracking not only affects the appearance of, rock wool production line production of rock wool board insulation effect, but also greatly reduced.
Therefore, in order to thoroughly solve this kind of problems, we must first do a good job in the grass-roots treatment during the construction, and the grass-roots level is flat and clean in order to ensure the good adhesion of the insulation layer. Secondly, after the thermal insulation layer is checked and accepted, we can start the construction, and we should choose the material with anti-cracking effect to construct, and we must remember to paste a layer of mesh yarn, so as to ensure the reliability and stability of the whole thermal insulation system.
Ⅱ. What is the use of products made by rockwool production line?
Rock wool board produced by rock wool production line is the most commonly used thermal insulation material, which can be used for building exterior wall or roofing, and sometimes for interior decoration. In addition to providing good heat preservation and energy saving, it can also effectively absorb sound and reduce shock.
In order to ensure the heat preservation effect of rock wool board after construction, attention should be paid to the specification and strict acceptance during installation. Compared with other similar thermal insulation materials, rock wool production line production of rock wool board thermal insulation effect is more ideal, rock wool slitting machine production is also relatively simple. Like other exterior wall thermal insulation panels, staggered pasting and anchorage, should be carried out. Remember to strengthen the cracking prevention treatment in the same way as the problem-1 treatment.
Ⅲ. Rock wool production line manufacturing process
Compared with other production lines, the production process of, rock wool production line is very simple, as long as there is one condition: under the condition of hot pressing equipment for rock wool composite board, some other brightly colored rocks are melted and remelted in a high temperature furnace, and then the rock wool felt is glued into the desired shape with an adhesive. This is the whole process of making rock wool products. Of course, the whole process is inseparable from rock wool production line, which can not only save time, but also save labor costs.
With 53 years' experience, Jinggongis specialized in manufacturing high-qualityC Z purlin roll forming machine, sandwich panel production line, etc. feel free to contact!
Send product request
Other supplier products
 |
Downspout Roll Forming Machine | This downspout roll forming machinecan produce the sealed color water pipes by forming the colored steel sheet and whipstitch it. Thedownspout form... |
 |
H-Beam Assembling Machine | The clamping and alignment of the web plate and flange plate will be done in h beam assembly machine, there also have automatic tack-welding. Jingg... |
 |
H-Beam Straightening Machine | H-Beam StraighteningMachine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will hav... |
 |
Uncoiler | Our uncoiler machine is suitable for the uncoiling and conveying of thin metal sheets. It is the auxiliary equipment forroll forming machines. The ... |
 |
Pipe Bending Machine | The CNCChina pipe bending machineis used to make a circle, curve, or spiral for workpieces. It is widely used in such fields as the petroleum indus... |
Same products
 |
Intelligent Precision Glue Control System | Seller: 855005 | Intelligent Precision Glue Control System The Golden Horse GM-4020 is an intelligent glue concen... |
 |
JM-5416D Automatic Rigid Box Making Machine | Seller: 855005 | JM-5416D Automatic Rigid Box Making Machine The JM-5416Dintelligent visual fully automatic box m... |
 |
Positioning Machine JM-600B | Seller: 855005 | Positioning Machine JM-600B The vision positioning machineis the core component for producing li... |
 |
Automatic Feida Gluing Machine JM-600A | Seller: 855005 | Automatic Feida Gluing Machine JM-600A Automatic Gluing Machineis used for gluing the cover pape... |
 |
Automatic Grooving Machine JM-1200 | Seller: 855005 | Automatic Grooving Machine JM-1200 The JM-1200 Automatic Cross Grooving Machineis capable of bid... |
