Liner Wiper Plug
The Liner Wiper Plugmay be shear-pinned on the bottom of the setting tool. The conjunction with pump down plug keeps mud to be separated from cement and removes the cement from the inside of the liner.
The Saigao latch-in liner wiper plug is similar in design to the standard liner wiper plug and has the same function of wiping the liner of excess cement. The primary difference is that it has a latch-in nose assembly located at the bottom of the plug. After wiping the liner the plug lands in a landing collar located near the bottom of the liner. The plug nose has a snap ring that latches into the landing collar, thus locking the wiper plug and drill pipe dart tandem in place. This ensures that the plugs will not move during subsequent operations. What is the difference between landing collar and float collar. The landing collar serves a second purpose in that it has a function similar to that of a float collar. The float collar contains a valve that allows the cement to flow to the bottom of the liner and through the float shoe. Once the cement job is complete the valve in the float shoe closes so cement doesn’t come back up the liner. If the float shoe fails the valve in the float collar acts as a back up to the float shoe. Once the plug assembly latches into the landing collar it effectively closes off any pathway for fluid flow. Therefore a wiper plug landing collar can effectively be used in place of a standard float collar. The landing collar is an additional item that is used only with the latch-in wiper plug. All materials in the wiper plug and landing collar can be easily drilled out later.
Technical Parameters ofLiner Wiper Plug
Specifications, mm |
Φ177.8 |
Φ139.7 |
Φ127/Φ114.3 |
Φ101.6 |
Φ88.9 |
Shearing Pressure, MPa |
12 |
12 |
12 |
12 |
12 |
Φ55 |
Φ50 |
Φ42 |
Φ35 |
Φ32 |
|
Back-pressure, MPa |
25 |
25 |
25 |
25 |
25 |
If you are looking for oilfield cementing toolscompanies, please give SAIGAO GROUPan opportunity to cooperate with you.
Send product request
Other supplier products
GX Type Casing Scraper | GX type casing scraperis with a spring and rotating design, which can removes rust, scale, cement, mud, bullets, paraffin, perforation burrs and ot... | |
BW160/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump | BW series mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, foun... | |
Hydraulic Liner Hanger Landing Collar | The landing collarcomprises housing, ball seat and latch. The latch holds ball seat through pins. After the hanger is set, pressure is applied to r... | |
ISHING TOOLS | The fishing tool is the most widely used tool for overhauling oil and water wells. There are many varieties and specifications of fishing tools. ... | |
Gate Valve | WKM Gate Valve A slab mud gate valveis a sliding valve in which the closing members are parallel rams. The closing member may be a single shutte... |