Super Fishing Jar Type CSJ
This is a hydraulic jar with the characteristics of compact structure, reliable seal, high strength and optimum up jarring effect. It is the first selected tool in fishing operation in the case of freeing the sticking point by up jarring. When used with jar intensifier type YJQ, a remarkable jarring effect can be obtained.
TYPE O.D.
in(mm) I.D.
in(mm) Tool Joint
Connection
API Max. Working
Torque
Lbf-ft(N.m) Max. Working
Load
Lbf(N) Max. Tensile
Load
Lbf(N) Max. Stroke
in(mm) Closed Overall Length
ft-in(mm)
CSJ36 3-3/4(95) 1-3/32(28) 2-3/8REG 4,420 (6,000) 44,960 (200,000) 112,410 (500,000) 12(305) 12’9”(3,882)
CSJ42 4-1/4(108) 1-1/4(32) NC31 5,530 (7,500) 56,250 (250,000) 157,370 (700,000) 12(305) 12’9”(3,882)
CSJ44 4-1/2(114) 2(51) NC31 7,220 (9,800) 67,440 (300,000) 179,850 (800,000) 12(305) 12’9”(3,882)
CSJ46 4-3/4(121) 2(51) NC38 7,220 (9,800) 78,680 (350,000) 202,340 (900,000) 12(305) 12’9”(3,882)
CSJ54 5-1/2(140) 2(51) NC38 8,770 (11,900) 89,920 (400,000) 224,820 (1,000,000) 12(305) 12’10”(3,900)
CSJ62 6-1/4(159) 2-1/4(57) NC50 10,840 (14,700) 157,370 (700,000) 337,230 (1,500,000) 12-1/2(320) 13’(3,977)
CSJ64 6-1/2(165) 2-1/4(57) NC50 10,840 (14,700) 157,370 (700,000) 337,230 (1,500,000) 12-1/2(320) 13’(3,977)
CSJ65 6-5/8(168) 2-1/4(57) NC50 10,840 (14,700) 168,610 (750,000) 359,710 (1,600,000) 12-1/2(320) 13’(3,977)
CSJ70 7(178) 2-23/64(60) NC50 10,840 (14,700) 179,850 (800,000) 404,670 (1,800,000) 12-1/2(320) 13’3”(4,045)
CSJ76 7-3/4(197) 3-5/64(78) 6-5/8REG 14,450 (19,600) 224,820 (1,000,000) 472,100 (2,100,000) 13(330) 14’2”(4,328)
CSJ80 8(203) 3-5/64(78) 6-5/8REG 14,450 (19,600) 269,780 (1,200,000) 562,050 (2,500,000) 13(330) 14’2”(4,328)
CSJ90 9(229) 3-5/64(78) 7-5/8REG 16,500 (21,700) 303,500 (1,350,000) 674,460 (3,000,000) 13(330) 14’2”(4,328)
Other supplier products
|
|
Safety Clamps |
Safety Clamps are the essential hold-up device for drilling string and drill tools. When adjusting the working range, it only needs to reassemble c... |
|
|
Drill Pipe |
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardband... |
|
|
Drill Collar Slips |
DCS Drill Collar Slips, there are three model: S, R and L, they can accommodate drill collar from 3”(76.2mm) to 14”(355.6mm)O.D.
Type WT Drill Col... |
|
|
Pipe fittings |
Pipe fittings(Tee joints, elbows, pipe caps, reducers)
Tee joints(including straight tee joints and reducing tee joints)
Nominal diameter Wall thi... |
|
|
Valves |
Check Valve
Usually used for Kill Manifold
The sealing face of core and seat is overlaying-welded with hard alloy with erosion and corrosion resi... |
All supplier products
Same products
