Double Side Hot Press
Double side hot press is mainly applied for two-sided decorative wood panels. Hot forming process is finished on the two sides at one time. The oil cylinder is placed at the upper end, and a board infeed conveyor is also supplied. The double side hot press is used the most widely on the market.
Double side hot press is mainly designed for wood panels with thickness of 6mm or more. It also applies for the production of decorative panels with different kinds of surface, such as glossy, matt, pitted, embossed, synchronous, etc.
Specifications:
Model: TLY114×8/12-Ⅱ
Nominal gross pressure: 12000Kn
Direction of feeding plate: Horizontal
Layer counting: 1 Layer
Distance between hot platens: 300mm
Number of hot platens: 2pcs
Number of cylinders: 6pcs
Diameter of cylinder: Φ320mm
Stroke of cylinder: 300mm
Pressurization: ≤25Mpa
The position of cylinder: Up
Empty closing time: About 4s
Number of lift cylinder: 4pcs
Diameter of cylinder: 60mm, 30mm
Stroke of cylinder: 300mm
High pressure pump flowing: About 89L/min
Allowed pressure: ≤25Mpa
Power: 37Kw
Pressure of unit plate blank: 40Kgf/cm2
Control method: Automatic pump
Electrical appliance: Siemens
Products board size: 2440×1220
Overall size: 3490×1400×3200mm
Steel plate thickness: 40mm,35mm,20mm
Other supplier products
|
|
Platen press line |
Function: The platen press line is used for curing the steel (fabric) cord conveyor belt.Performance introduction:1. It is controlled by PLC and to... |
|
|
Tow-roll mixing mill |
Open tow-roll mixing mill is mainly used for cooking, rubber sheeting, gel breaking, plasticating and mixing.Basic structure:This machine is mainly... |
|
|
Press Machine For Steel Plate Straightening |
The pressing-head of machine can move in three dimensions and reach any positions within the effective range of working table, to straighten struct... |
|
|
PVC Mould |
Wuxi Enork International Co.,Ltd is one of the China pvc mould manufacturer and supplier, as a professional pvc mould company, we have our own pvc ... |
|
|
Hot Press Platen |
Specification 1. Flatness tolerance: 0.05+0.05/1000.Lmm2. Parallelism tolerance: 0.05+0.05/1000.Lmm3. Surface roughness: 1.64. Surface temperature ... |
All supplier products
Same products
