Double Side Hot Press
Double side hot press is mainly applied for two-sided decorative wood panels. Hot forming process is finished on the two sides at one time. The oil cylinder is placed at the upper end, and a board infeed conveyor is also supplied. The double side hot press is used the most widely on the market.
Double side hot press is mainly designed for wood panels with thickness of 6mm or more. It also applies for the production of decorative panels with different kinds of surface, such as glossy, matt, pitted, embossed, synchronous, etc.
Specifications:
Model: TLY114×8/12-Ⅱ
Nominal gross pressure: 12000Kn
Direction of feeding plate: Horizontal
Layer counting: 1 Layer
Distance between hot platens: 300mm
Number of hot platens: 2pcs
Number of cylinders: 6pcs
Diameter of cylinder: Φ320mm
Stroke of cylinder: 300mm
Pressurization: ≤25Mpa
The position of cylinder: Up
Empty closing time: About 4s
Number of lift cylinder: 4pcs
Diameter of cylinder: 60mm, 30mm
Stroke of cylinder: 300mm
High pressure pump flowing: About 89L/min
Allowed pressure: ≤25Mpa
Power: 37Kw
Pressure of unit plate blank: 40Kgf/cm2
Control method: Automatic pump
Electrical appliance: Siemens
Products board size: 2440×1220
Overall size: 3490×1400×3200mm
Steel plate thickness: 40mm,35mm,20mm
Other supplier products
|
|
Pillar type plate vulcanizer |
The machine is used for pressing all kinds of rubber model products, rubber plate, thermosetting plastic, and so on. It is also can be used as comm... |
|
|
Press Machine For Steel Plate Straightening |
The pressing-head of machine can move in three dimensions and reach any positions within the effective range of working table, to straighten struct... |
|
|
Frame type plate vulcanizer |
The machine is used for pressing all kinds of rubber model products and thermosetting plastic like as related specification sealing products, proje... |
|
|
Hydraulic Lifter Table |
Hydraulic lifter table is the anxiliary part of the hot press machine.Technical parameter for reference:Table size 2400×1250mm Max.Loading Ca... |
|
|
Batch off line |
Function: the batch off line is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.Str... |
供应产品
Same products
|
|
钢轨磨耗测量尺 |
卖方: 842518 |
LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
|
|
道岔尖轨侧磨量及降低值检测尺 |
卖方: 842518 |
尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
|
|
滑动式钢轨磨耗尺 |
卖方: 842518 |
LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
|
|
数显式 辙叉结构高度测量器 |
卖方: 842518 |
LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面，分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 |
|
|
尖心轨降低值测量尺 |
卖方: 842518 |
辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
