CW61125B Swing over bed 1250mm conventional lathe made in china
CW61125B Swing over bed 1250mm conventional lathe made in china
This series lathe is suitable for large and medium parts processing for castings, steel part and nonferrous metals. It can be used for turning the outer circle, inner hole, section, cutting slot, drilling, boring and nesting.
StandardConfiguration:
1. The overall bed, the width of the guide 755, the tail of the sleeve cone hole: Morse6
2. 1.5 meters below the specifications without the center frame and with a knife
|
UNIT |
CW61125B |
||
|
CAPACITIES |
Swing over bed |
mm |
1250 |
|
Swing over carriage |
mm |
865 |
|
|
Max.length of workpiece |
mm |
1500-12000 |
|
|
Max.turning length |
mm |
1300-11800 |
|
|
SPINDLE |
Effective widthof gap |
||
|
Pan of guideway |
mm |
755 |
|
|
Spindle nose |
A2-15 |
||
|
Spindle bore |
mm |
130 |
|
|
Taper hole of spindle |
1:20/140 |
||
|
Range of spindle speeds |
r/min |
3.15~315 |
|
|
No.of spindle speeds |
21 |
||
|
FEED |
Longitudinal and cross |
r/min |
56/56 |
|
Cross/long longitudinal feed |
0.1~12 |
||
|
TURRET |
No. and range of metric thread |
mm |
44;1~120 |
|
No. and range of inch thread |
31;28~1/4 |
||
|
No. and range of module thread |
mm |
45;0.5~60 |
|
|
No. and range of dia. thread |
38;1/2~56DP |
||
|
Distance of spindle and tool plane |
mm |
48 |
|
|
Max.travel of cross slide |
mm |
580 |
|
|
Max.travel of top slide |
mm |
300 |
|
|
TAILSTOCK |
Section of tool shank |
mm |
45(260x260) |
|
Dia. of tailstock |
mm |
100/250 |
|
|
Rapid travel speeds |
mm/min |
Longitudinal:3740;cross:1870;Little slide:935 |
|
|
Travel of tailstock quill |
mm |
160 |
|
|
Taper hole of tailstock quill |
mores 6 |
||
|
Main motor power |
kw |
22 |
|
|
OTHERS |
Length |
mm |
4600-15100 |
|
Width/Height |
mm |
2150/1700 |
|
|
Max weight of workpiece |
kg |
6000 |
|
there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
When the gear and gear ring are engaged, the four locking claws are connected, synchronously and at the same time, can hold the circular workpiece.When the gear and gear ring are separated, the four claws are independent, which are the same as the original four-jaw chuck.
Anyang Xinheng Machine Tool Co. Ltd.are located in Anyang City, Henan Province. We have always been devoted to the research and manufacture of machine tools. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to visit our company!
|
Product name |
Type |
Swing over bed |
Max.length of workpiece |
|
Ordinary lathe machine |
CW6163/80/94 |
630~1640mm |
50-12000mm |
|
CW6180/CW61100 |
|||
|
CW61100/125/160 |
|||
|
Heavy duty lathe |
CW61125/140/160 |
1250~2500mm(10t~32t) |
3000-2000mm |
|
C61125/160/180/200 |
|||
|
C61160/200/250 |
|||
|
Spherical lathe |
C6555/95/160/180 |
550~1800mm |
Dia.of spherical:550-1800mm |
|
CNC lathe machine |
CK6142/52/63/80/94 |
420~1600mm |
750-6000mm |
|
CKB6180/100 |
|||
|
CK61100/125/160 |
|||
|
CNC heavy duty lathe machine |
CKH/CKHJ61125/160/200 |
1250~2500mm(16~63t) |
3000-20000mm |
|
CK61160/200/220/250 |
|||
|
CNC pipe thread lathe |
QK1212/19 |
Dia.of pipes:120~460mm |
750-2800mm |
|
QKP/QKA1226/46 |
|||
|
Mini lathe |
CJK0632/0632J |
200~500mm |
260~1000mm |
|
CJK0640/60/80 |
|||
|
CK6132/36/40/50 |
Web:
Tel: +86 372 3700288
Send product request
Other supplier products
 |
upset forging machine for Upset Forging of oil casing tube | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
Chinese CKH61200 heavy duty lathe machine with good service | Chinese heavy duty lathe machine with good service This machine not only processing a variety of shaft, disk type parts and turning all kinds of ... |
 |
upsetting press for Upset Forging of Oil Field tube | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
oil casing forging upsetter for Upset Forging of oil pipe end | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
High speed conventional heavy duty lathe price | High speed conventional heavy duty lathe price This machine tool belongs to heavy machine tool,the maximum weight is 16 tons, adopt the rectangul... |
Same products
 |
GT-FM24-PLC Filling Machine(3+9+9+3) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | Seller: Eurion Automation Co., Ltd. | High-Precision Servo Control System：Equipped with an industrial-grade control platform and import... |
 |
GT-FM18-PLC Filling Machine(8+2+8) Triple Guide Tube | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-FM-PLC (triple guide tubes in 6-48 station)MGO powder filling machine, is improv... |
 |
48 Station Fillimg Mahcine GT-FM48 | Seller: Zhaoqing City Greater Technology Co., Ltd | * DescriptionFM filling machine suitable for fill tubular heaters in long length, different diame... |
 |
8 Station Fillimg Mahcine GT-FM8 | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description FM filling machine suitable for fill tubular heaters in long length, different diam... |
