CW61125B Swing over bed 1250mm conventional lathe made in china
CW61125B Swing over bed 1250mm conventional lathe made in china
This series lathe is suitable for large and medium parts processing for castings, steel part and nonferrous metals. It can be used for turning the outer circle, inner hole, section, cutting slot, drilling, boring and nesting.
StandardConfiguration:
1. The overall bed, the width of the guide 755, the tail of the sleeve cone hole: Morse6
2. 1.5 meters below the specifications without the center frame and with a knife
|
UNIT |
CW61125B |
||
|
CAPACITIES |
Swing over bed |
mm |
1250 |
|
Swing over carriage |
mm |
865 |
|
|
Max.length of workpiece |
mm |
1500-12000 |
|
|
Max.turning length |
mm |
1300-11800 |
|
|
SPINDLE |
Effective widthof gap |
||
|
Pan of guideway |
mm |
755 |
|
|
Spindle nose |
A2-15 |
||
|
Spindle bore |
mm |
130 |
|
|
Taper hole of spindle |
1:20/140 |
||
|
Range of spindle speeds |
r/min |
3.15~315 |
|
|
No.of spindle speeds |
21 |
||
|
FEED |
Longitudinal and cross |
r/min |
56/56 |
|
Cross/long longitudinal feed |
0.1~12 |
||
|
TURRET |
No. and range of metric thread |
mm |
44;1~120 |
|
No. and range of inch thread |
31;28~1/4 |
||
|
No. and range of module thread |
mm |
45;0.5~60 |
|
|
No. and range of dia. thread |
38;1/2~56DP |
||
|
Distance of spindle and tool plane |
mm |
48 |
|
|
Max.travel of cross slide |
mm |
580 |
|
|
Max.travel of top slide |
mm |
300 |
|
|
TAILSTOCK |
Section of tool shank |
mm |
45(260x260) |
|
Dia. of tailstock |
mm |
100/250 |
|
|
Rapid travel speeds |
mm/min |
Longitudinal:3740;cross:1870;Little slide:935 |
|
|
Travel of tailstock quill |
mm |
160 |
|
|
Taper hole of tailstock quill |
mores 6 |
||
|
Main motor power |
kw |
22 |
|
|
OTHERS |
Length |
mm |
4600-15100 |
|
Width/Height |
mm |
2150/1700 |
|
|
Max weight of workpiece |
kg |
6000 |
|
there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
When the gear and gear ring are engaged, the four locking claws are connected, synchronously and at the same time, can hold the circular workpiece.When the gear and gear ring are separated, the four claws are independent, which are the same as the original four-jaw chuck.
Anyang Xinheng Machine Tool Co. Ltd.are located in Anyang City, Henan Province. We have always been devoted to the research and manufacture of machine tools. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to visit our company!
|
Product name |
Type |
Swing over bed |
Max.length of workpiece |
|
Ordinary lathe machine |
CW6163/80/94 |
630~1640mm |
50-12000mm |
|
CW6180/CW61100 |
|||
|
CW61100/125/160 |
|||
|
Heavy duty lathe |
CW61125/140/160 |
1250~2500mm(10t~32t) |
3000-2000mm |
|
C61125/160/180/200 |
|||
|
C61160/200/250 |
|||
|
Spherical lathe |
C6555/95/160/180 |
550~1800mm |
Dia.of spherical:550-1800mm |
|
CNC lathe machine |
CK6142/52/63/80/94 |
420~1600mm |
750-6000mm |
|
CKB6180/100 |
|||
|
CK61100/125/160 |
|||
|
CNC heavy duty lathe machine |
CKH/CKHJ61125/160/200 |
1250~2500mm(16~63t) |
3000-20000mm |
|
CK61160/200/220/250 |
|||
|
CNC pipe thread lathe |
QK1212/19 |
Dia.of pipes:120~460mm |
750-2800mm |
|
QKP/QKA1226/46 |
|||
|
Mini lathe |
CJK0632/0632J |
200~500mm |
260~1000mm |
|
CJK0640/60/80 |
|||
|
CK6132/36/40/50 |
Web:
Tel: +86 372 3700288
在线联系供应商
Other supplier products
 |
upsetting press for Upset Forging of Oil Field tube | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
tube end forging upsetter | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
upsetting machine | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
 |
Low production cost | Product Description: Automatic bearing outer ring inner race production line: XSPT-002 bearing ring automatic line with three ADJ15P CNC lathes a... |
 |
oil casing tube forging upsetter | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... |
Same products
 |
尖心轨降低值测量尺 | 卖方: 842518 | 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值，具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |
 |
便携式激光弦线 | 卖方: 842518 | 激光准直仪用于测量轨道水平和线路，以辅助轨道测量和人工捣固作业。它可以测量水平和垂直。它主要由激光发射装置、靶标定位装置和移动定位靶标装置组成。 |
 |
轨底坡测量装置 | 卖方: 842518 | Основная часть катания колеса имеет наклон внутрь 1:40. Для того чтобы верхняя часть рельсового п... |
 |
NGM-6.3II型内燃钢轨打磨机 | 卖方: 842518 | 该机主要用于铁路钢轨维护施工中的焊缝恢复打磨、压延毛刺、轨面修复、波形磨损等。该机不仅仿形精度、打磨效率等技术性能有较大提高，而且由于数控进给单元的开发应用，实现了砂轮进给的智能控制，大大简化了... |
 |
NCM-5.1型内燃道岔打磨机 | 卖方: 842518 | NCM-5.1道岔打磨机是专门针对道岔、交叉口及轨头两侧的打磨作业而设计的。该机打磨装置可从垂直方向向左右倾斜30°，并可沿纵横方向调整打磨轮的位置，使该机打磨装置在钢轨间狭小空间内也能... |
