MB8 3+1 axis CNC Hydraulic Servo Press Brake Machine -DELEM DA52S

Produced by: Manshan Gilde CNC Machine Tool Co.,Ltd

All supplier products

Send product request

1. The design of this servopress brake compliance with EU international standards. The fuselage eliminates internal stress by annealing and ensures higher strength and precision. All these MB8 series steel sheet bending machines are designed by SOLID WORKS 3D programming system and made with enhanced ST44-1 quality steel with the latest technology.

2. The MB8 seriesservopress brake electro-hydraulic bending machine uses CNC control system（Delem DA52S from Holland） to help increase your productivity and keep the lowest cost and lower maintenance costs.High quality and repetitive bending is obtained by using synchronized cylinders and valves.

3. The latest high frequency response hydraulic control technology, high speed, high efficiency and high precision.

4. Rigid upper beam runs on 8-point bearings with bending precision of +/-0.01 mm

5. Using fully closed-loop electro-hydraulic servo control technology, bilateral gratings can feedback slider position signals to CNC system to control the 2 cylinders(Y1,Y2) running on the same frequency, maintaining the parallel state of the workbench.

STANDARD EQUIPMENT

1. 4- axis Dutch Delem DA52S CNC controller.

2. Full synchronizationof 2 cylinders(Y1,Y1) with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01 mm accuracy.

3. Linear guide rail and ball screw accuracy of 0.01 mm (HIWIN,TAIWAN).

4. Steel mono-block construction.

5. fully closed-loop electro-hydraulic servo synchronously controls the system

6. Standard electrics from Schneider,France.

7. Standard oil tube connectors from EMB Germany.

8. Standard valves and oil pump from Bosch Rexroth Germany.

9. Standard main motorfrom Siemens Germany.

10. Hydraulic and electrical overload protection.11. Light guards ensure the safety of operators during operation(optional).

Dutch Delem DA52S Controller:

·6,4″ VGA color LCD (TFT). Dutch Delem DA52S Controller

·Numerical, quick one page programming.·Up to control 4 axies (Y1,Y2 and 2 auxiliary axes).·Developed length calculation.·Tool/material/product library, 30 upper dies, 30 lower dies.·Support multiple language Settings.·Automatically calculate workbench deflection compensation value die safety region·Delem Modusys compatibility (module scalability and adaptability).·USB, memory stick interfacing.·Servo, frequency inverter and AC control for back-gauge axis.·Advanced Y-axis control algorithms for closed loop as well as open loop valves.·Crowning control.

DETAILED PICTURES

	European Standard Punch & Dies: Made of 42CrMo steel to keep good hardness and strength.
Main motor:Siemens, Germany German Siemens motor works with low noise and keep long servicelife,alsoeasy to maintain.
	Sealing rings:NOK, Japan HydraulicValve:Bosch Rexroth，GermanyThe scientific system can effectively prevent the problems caused by hydraulic oil leakage.
Oil Pump:Bosch Rexroth, Germany Guaranteed long service life and low working noise.
	Electrics:Schneider, France long service life and stable.frequency converter:DELTA,USAToprevent X-axis swinging when positioning.
Germany Bosch Rexroth fully-closed-loop electro-hydraulicservocontroltechnology & Spain FAGOR grating ruler: Slider position signal is feedbacked to the controller by Spain FAGOR grating ruler, then the CNCthe controller adjusts the amount of fuel tank by changing the synchronous valve opening size,thereby controlling the slider(Y1, Y2)running on the same frequency, maintaining the parallelstate of the worktable.
	Multi-function foot switch: Integrated Z1 & Z2 axes control.
Mechanical quick clamp: Improve the clamping accuracy, efficiency and safer.
	V axis hydraulic crowning: To improve the accuracy of the bending angle and linearity.

Crowning's action analysis:

MB8 Series Electro-hydraulic Automatic Servo Press Brake (Steel Sheet BenderMachine) Technical Parameters

Type	Unit	63T/2500	80T/3200	100T/3200	160T/3200	200T/3200	250T/3200	320T/3200
Nominal Force	KN	630	800	1000	1600	2000	2500	3200
Bending Length	mm	2500	3200	3200	3200	3200	3200	3200
Poles Distance	mm	1900	2700	2700	2700	2700	2700	2700
Throat Depth	mm	350	350	400	400	400	400	400
Slider Travel	mm	170	170	200	200	200	200	200
Die Loading Height	mm	380	380	420	420	420	420	420
Power	KW	5.5	7.5	7.5	11	15	15	22
Compensation number		2	3	3	3	3	3	3
Axes		3+1	3+1	3+1	3+1	3+1	3+1	3+1
Back Gauge Travel	mm	500	500	500	500	500	500	500
Back Gauge Speed	mm/s	200	200	200	200	200	200	200
Dimension	mm	3100×1450×2050	3500×1550×2100	3500×1580×2400	3500×1650×2500	3500×1680×2550	3500×1700×2600	3500×1800×2730
Weight	ton	5.8	7.8	8.5	11	14.2	15.6	16.8


Type	Unit	400T/4000	500T/5000	500T/6000	500T/7000	600T/5000	600T/6000	600T/7000
Nominal Force	KN	4000	5000	5000	5000	6000	6000	6000
Bending Length	mm	4000	5000	6000	7000	5000	6000	7000
Poles Distance	mm	3500	3900	4900	5900	3900	4900	5900
Throat Depth	mm	400	500	500	500	500	500	500
Slider Travel	mm	320	320	320	320	320	320	320
Die Loading Height	mm	420	600	600	600	600	600	600
Power	KW	30	37	37	37	45	45	45
Workbench Mechanical Compensation Machanism
Axes		3+1	3+1	3+1	3+1	3+1	3+1	3+1
Back Gauge Travel	mm	500	800	800	800	800	800	800
Back Gauge Speed	mm/s	200	200	200	200	200	200	200
Dimension	mm	4500×2450×3500	5400×2810×4300	6500×2810×4500	7500×2810×4900	5500×2910×4900	6500×2910×5100	7500×2910×5200
Weight	ton	31	38	53	60	65	68	72


Type	Unit	800T/6000	800T/8000	1000T/6000	1000T/8000	1000T/10000	1200T/6000	1200T/8000
Nominal Force	KN	8000	8000	10000	10000	10000	12000	12000
Bending Length	mm	6000	8000	6000	8000	10000	6000	8000
Poles Distance	mm	4900	5900	5900	6900	8000	4900	6900
Throat Depth	mm	600	600	600	600	600	600	600
Slider Travel	mm	400	400	400	400	400	400	400
Die Loading Height	mm	600	600	600	600	600	800	800
Power	KW	55	55	2×37	2×37	2×37	2×37	2×37
Axes		3+1	3+1	3+1	3+1	3+1	3+1	3+1
Back Gauge Travel	mm	800	800	800	800	800	1000	1000
Back Gauge Speed	mm/s	200	200	200	200	200	200	200
Dimension	mm	6500×2750×5300	8500×2750×5900	6500×2800×5600	8500×2800×6100	10500×2800×5850	6500×3100×5850	8500×3100×7150
Weight	ton	90	120	100	130	150	130	160


Type	Unit	1600T/6000	1600T/8000	1600T/8000	1600T/10000	2000T/8000	2000T/12000	2300T/13000
Nominal Force	KN	16000	16000	16000	16000	20000	20000	23000
Bending Length	mm	6000	8000	8000	10000	8000	12000	13000
Poles Distance	mm	4900	5800	6900	8000	6200	9050	10050
Throat Depth	mm	600	600	600	600	600	600	600
Slider Travel	mm	400	400	400	400	400	400	400
Die Loading Height	mm	800	800	800	800	800	800	800
Power	KW	2×55	2×55	2×55	2×55	2×55	2×55	2×55
Axes		3+1	3+1	3+1	3+1	3+1	3+1	3+1
Back Gauge Travel	mm	1000	1000	1000	1000	1000	1000	1000
Back Gauge Speed	mm/s	200	200	200	200	200	200	200
Dimension	mm	6500×3300×6500	7200×3300×7000	8500×3300×7000	10500×3000×8000	8500×3500×8000	12500×3800×8300	13500×3800×8300
Weight	ton	150	170	190	210	260	320	375

MB8 Series Electro-hydraulic Automatic Servo Press Brake (Steel Sheet Bender Machine) Components

Serial No.	Part Description	Brief instruction	Country of origin
1-	CNC System	DA52S controller	Netherland
2-	Electrical components	Schneider Electrical	French
3-	Main Motor	Siemens	Germany
4-	Servo Motor&Drive	Estun	China
5-	BackGauge & RAM Drive	Inverter fromDelta	Taiwan,China
6-	Ball screw/ Liner guide	HIWIN	Taiwan,China
7-	Foot switch	KACON	Korea
8-	Travel switch	Schneider Electrical	French
9-	Hydraulic System	Bosch-Rexroth	Germany
10-	Hydraulic Pump	SUNNY	USA
11-	Tubing connector	EMB	Germany
12-	Seal Ring	NOK	Japan
13-	Die	One set standard tools from GLDMA	China
14-	Front/Back Safety Guard	GLDMA	China
15-	Grating Ruler	FAGOR	Spanish
16-	Standard fast clamp	GLDMA	CHINA
17-	Standard axis	3+1 (Y1、Y2、X+V)
Optional
1-	Safety light curtain	KELI	China
2-	Laser Safety Protection	FIESSLER	Germany
3-	Manual Crowning system	GLDMA	CHINA
4-	E200P /DA41s	Estun/Delem	CHINA/Dutch
5-	High level Fast Clamp	KYOKKO	Japan
6-	Deflection Compensation	Mechanical Compensation
7-	Optional axis	Z1,Z2,R
8-	Controller	DELEM DA56,DA66T	Netherland
Safety Configuration
1-	Warning of high oil temperature	■Yes□No
2-	High oil pressure protection	■Yes□No
3-	Motor overload protection	■Yes□No
5-	Left & Right side protection	■Yes□No	Fixed type(metal)
6-	Electricity leakage protection	■Yes□No
9-	Safety standards	■CE□CSA■NR-12□OSHA

CONTACT

+86

EMAIL:WEB:

COMPANY:Ma'anshan Gilde CNC Machine Tool Co.,Ltd

Send product request

Other supplier products

	Hydraulic Press Brake	Hydraulic Press Brake machine belong to the universal machine tools, mainly used for metal sheet and plate bending, by both sides is two pieces of ...
	MB8 3+1 axis CNC Hydraulic Servo Press Brake Machine -DELEM DA52S	1. The design of this servopress brake compliance with EU international standards. The fuselage eliminates internal stress by annealing and e...
	YL78 Series Hydraulic Door Skin Press Machine	Features of YL78 Series HydraulicDoor Skin Press Machine 1. This machine is characterized by high efficiency, convenient and safe operation, e...
	MB8 3+1 axis CNC Hydraulic Servo Press Brake Machine -DELEM DA52S	1. The design of thisservopress brakecompliance with EU international standards. The fuselage eliminates internal stress by annealing and ensures...
	WC67K CNC Hydraulic Sheet Metal Press Brake Bender Machine With DA41s System	1. This CNC hydraulic metalsheetstandard press brakebender machine compliance with EU standards. The frame of this bender machine eliminates in...

All supplier products

Same products

JMS-50TPM Two-Stage Permanent Magnet VSD Screw Air Compressor	Seller: Jiangxi JAMERS Energy-Saving Technology Co.,Ltd.	JMS-50TPM Two-Stage Permanent Magnet VSD Screw Air Compressor Direct-drive PMSM eliminates belts...
JMS-50HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor	Seller: Jiangxi JAMERS Energy-Saving Technology Co.,Ltd.	JMS-50HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor This integrated sy...
JMS-30HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor	Seller: Jiangxi JAMERS Energy-Saving Technology Co.,Ltd.	JMS-30HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor This integrated sy...
JMS-20HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor	Seller: Jiangxi JAMERS Energy-Saving Technology Co.,Ltd.	JMS-20HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor Factory-piped and ...
JMS-10HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor	Seller: Jiangxi JAMERS Energy-Saving Technology Co.,Ltd.	JMS-10HPM Integrated Permanent Magnet Variable Frequency Screw Air Compressor Fully piped and fa...