T4L8 Four Point Eight Link Mechanical Press
The T4L8 series mechanical eccentric press is a four point eight-linkage press. It has its own special structures as a large-scale tonnage press machine made by KINGLAN. In the transmission system of the press, the multi-link mechanism not only keeps the working stroke of the slider at a lower uniform speed, but also increases the speed of the slider in the approach stroke and the return stroke, thereby shortening the stroke cycle time of the slider and increasing the number of strokes of the press.
The starting point of the multi-link drive is to reduce the working stroke speed and speed up the idle speed to achieve the goal of improving productivity. The multi-link mechanical stamping press is divided into six links, eight links, ten links and other different types of presses. Among them, the eight-link is especially suitable for sheet metal stamping and deep drawing processes, and is used for mass production of large-scale thin-plate covers, such as the roof and doors of cars and trucks. It is especially suitable for deep drawing work.
The impact force of the mold in the stretching work area is small, and the working area at full load is long. However, due to the complicated structure of the transmission system, the required processing and assembly precision is high, so the manufacturing cycle is long, and the manufacturing cost is increased.
Well made products, innovation promote advance is KINGLAN's faith. KINGLAN face to the global, service the world. Choose KINGLAN equals to choose integrity and fortune!
在线联系供应商
Other supplier products
 |
ALC Double Crank C Frame Press | The ALC series of open type double crank c frame mechanical pressis one of the best selling products of our company. The main drive gears, shafts, ... |
 |
Stamping Die | As an inseparable part of metal stamping line, are much important in its service life and precision as it directly works on stamping parts and effe... |
|
|
3 in 1 Decoiler Straightener and Feeder | 3 in 1 feeder is especially suitable for high strength steel, enhancing the processing precision. Machine has adopted electric straightening precis... |
 |
ALD Single Crank Semi-closed Press | The ALD series is a semi-closed crank stamp press machineindependently developed by KINGLAN to meet customer needs. It has the characteristics of s... |
 |
ALT Double Crank Integrated H Frame Press | The ALT series h type press machineis closed type double-point circulating thin oil lubrication. The ultra-long eight-sided guide rails can maintai... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
