TG-E Multi-stage Hydraulic Cylinders
Product Introduction:
TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the advantages of small size and long stroke, and is mainly used in the hydraulic system of engineering and mining dump trucks.
Product Description
Product Advantage:
Telescopic hydraulic cylinders are also known as multi-stage hydraulic cylinders. It is made up of two or more stages of piston cylinders, mainly composed of cylinder heads, cylinders, sleeves, pistons and other parts. There are inlet and outlet ports A and B at both ends of the cylinder. When the A port enters the oil and the B port returns to the oil, the first stage piston with a large effective area is firstly driven, and then the smaller secondary piston movement is pushed. Since the flow rate entering the A port is constant, the piston with a large effective working area has a low moving speed and a large thrust, and the moving speed is high and the thrust is small. If port B enters oil and port A returns oil, the secondary piston will first return to the end point, and then the first stage piston will return.
The characteristics of the telescopic hydraulic cylinder are: the working stroke can be very long, and it can be shortened when not working. It is suitable for applications where the installation space is limited and the stroke requirements are long, such as dump trucks and crane telescopic arms. When the telescopic hydraulic cylinder is extended step by step, the effective working area is successively reduced. When the input flow rate is constant, the overhanging speed gradually increases; when the external load is constant, the working pressure of the hydraulic cylinder gradually increases. The extension of the single-acting telescopic hydraulic cylinder relies on the oil pressure, and it relies on its own weight or load when contracting. Therefore, it is used in the case where the cylinder is tilted or vertically rotated. Our company can customize telescopic hydraulic cylinders according to customer requirements.
Model Coding:
① Level 4 stages
② Unit code
③ Pressure E: 16MPa
④ Max. bore (mm)
⑤ Single level stroke (mm)
Specification:
Model |
Bore mm |
Total stoke mm |
Pressure 16MPa |
B |
A |
d |
L |
ΦxT |
n-M1 |
D |
M2 |
G |
h |
|
First stage pushing force(KN) |
End stage pushing force(KN) |
|||||||||||||
4TG-E110X250 |
1000 |
152 |
252 |
150 |
50 |
437 |
Φ30x35 |
8-M12 |
170 |
150 |
||||
4TG-E110X300 |
1200 |
487 |
||||||||||||
4TG-E110X340 |
1360 |
527 |
||||||||||||
3TG-E110X250 |
110-90-70 |
750 |
152 |
437 |
Φ30x35 |
8-M12 |
170 |
137 |
||||||
3TG-E110X300 |
900 |
487 |
||||||||||||
3TG-E110X340 |
1020 |
527 |
||||||||||||
4TG-E100X250 |
1000 |
240 |
140 |
437 |
Φ20x30 |
8-M12 |
165 |
25 |
150 |
|||||
4TG-E100X300 |
1200 |
487 |
||||||||||||
4TG-E100X340 |
1360 |
527 |
||||||||||||
3TG-E100X250 |
100-80-60 |
750 |
437 |
Φ30x35 |
8-M12 |
165 |
||||||||
3TG-E100X300 |
900 |
487 |
||||||||||||
3TG-E100X340 |
1020 |
527 |
||||||||||||
3TG-E90X250 |
90-70-50 |
750 |
212 |
132 |
40 |
437 |
Φ30x35 |
6-M10X1 |
150 |
|||||
3TG-E90X300 |
900 |
487 |
||||||||||||
3TG-E90X340 |
1020 |
527 |
||||||||||||
2TG-E90X250 |
90-70 |
500 |
437 |
Φ30x35 |
6-M10X1 |
150 |
||||||||
2TG-E90X300 |
600 |
487 |
||||||||||||
2TG-E90X340 |
680 |
527 |
||||||||||||
3TG-E80X250 |
80-60-40 |
750 |
200 |
120 |
437 |
Φ20x30 |
6-M10X1 |
140 |
25 |
137 |
||||
3TG-E80X300 |
900 |
487 |
||||||||||||
3TG-E80X340 |
1020 |
527 |
||||||||||||
2TG-E80X250 |
80-60 |
500 |
437 |
Φ30x35 |
6-M10X1 |
140 |
||||||||
2TG-E80X300 |
600 |
487 |
||||||||||||
2TG-E80X340 |
680 |
527 |
||||||||||||
2TG-E70X250 |
70-50 |
500 |
169 |
109 |
30 |
437 |
Φ30x35 |
6-M8X1 |
130 |
|||||
2TG-E70X300 |
600 |
487 |
||||||||||||
2TG-E70X340 |
680 |
527 |
||||||||||||
2TG-E60X250 |
60-40 |
500 |
157 |
97 |
437 |
Φ20x30 |
6-M8X1 |
130 |
25 |
|||||
2TG-E60X300 |
600 |
487 |
||||||||||||
2TG-E60X340 |
680 |
527 |
We provide multi stage telescopic hydraulic cylinder,5 stage hydraulic cylinder,4 stage telescopic hydraulic cylinderand three stage hydraulic cylinder,RFQ today!
Send product request
Other supplier products
Medium Excavator Series Cylinders | Brief Introduction: This type of cylinder is mainly used for medium excavators, including stick cylinders, boom cylinders, and bucket cylinders. U... | |
BM6 High Pressure Motor | What is BM6 High Pressure Hydraulic Motor? BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, fro... | |
Hydraulic Steering Control Units | Hydraulic Steering Control Units The hydraulic steering gear is a hydraulic power steering type between the steering wheel and the steering mechan... | |
Products | Are you looking for forged metal products? Industry leaders in a variety of demanding markets continue to choose Walker Forge as a full-service pa... | |
Hydraulic Cylinder | Founded in 2000, JC forging, industrial hydraulic cylinders manufacturers,is a professional manufacturer of precision forging parts. The company's ... |
Same products
protective clothing Antisynthetic blood penetration tester | Seller: Qinsun Instruments Co., Ltd | It is applicable to the resistance of the protective clothing to the synthetic blood penetration ... | |
Respirator Fit Tester | Seller: Qinsun Instruments Co., Ltd | The Protective Mask Leak Tester is a portable device designed to detect the service performance a... | |
Floor coverings flammability tester | Seller: Qinsun Instruments Co., Ltd | Applications:TheFlammability Test Chamberis used to test the effects of a small source of ignitio... | |
Cantilever Fabric Stiffness Tester | Seller: Qinsun Instruments Co., Ltd | Application: Fabric Stiffness Tester, is a practical equipment to determine the bending height, ... | |
Automatic Wrinkle Recovery Tester | Seller: Qinsun Instruments Co., Ltd | The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the spe... |