TG-E Multi-stage Hydraulic Cylinders
Product Introduction:
TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the advantages of small size and long stroke, and is mainly used in the hydraulic system of engineering and mining dump trucks.
Product Description
Product Advantage:
Telescopic hydraulic cylinders are also known as multi-stage hydraulic cylinders. It is made up of two or more stages of piston cylinders, mainly composed of cylinder heads, cylinders, sleeves, pistons and other parts. There are inlet and outlet ports A and B at both ends of the cylinder. When the A port enters the oil and the B port returns to the oil, the first stage piston with a large effective area is firstly driven, and then the smaller secondary piston movement is pushed. Since the flow rate entering the A port is constant, the piston with a large effective working area has a low moving speed and a large thrust, and the moving speed is high and the thrust is small. If port B enters oil and port A returns oil, the secondary piston will first return to the end point, and then the first stage piston will return.
The characteristics of the telescopic hydraulic cylinder are: the working stroke can be very long, and it can be shortened when not working. It is suitable for applications where the installation space is limited and the stroke requirements are long, such as dump trucks and crane telescopic arms. When the telescopic hydraulic cylinder is extended step by step, the effective working area is successively reduced. When the input flow rate is constant, the overhanging speed gradually increases; when the external load is constant, the working pressure of the hydraulic cylinder gradually increases. The extension of the single-acting telescopic hydraulic cylinder relies on the oil pressure, and it relies on its own weight or load when contracting. Therefore, it is used in the case where the cylinder is tilted or vertically rotated. Our company can customize telescopic hydraulic cylinders according to customer requirements.
Model Coding:
① Level 4 stages
② Unit code
③ Pressure E: 16MPa
④ Max. bore (mm)
⑤ Single level stroke (mm)
Specification:
|
Model |
Bore mm |
Total stoke mm |
Pressure 16MPa |
B |
A |
d |
L |
ΦxT |
n-M1 |
D |
M2 |
G |
h |
|
|
First stage pushing force(KN) |
End stage pushing force(KN) |
|||||||||||||
|
4TG-E110X250 |
1000 |
152 |
252 |
150 |
50 |
437 |
Φ30x35 |
8-M12 |
170 |
150 |
||||
|
4TG-E110X300 |
1200 |
487 |
||||||||||||
|
4TG-E110X340 |
1360 |
527 |
||||||||||||
|
3TG-E110X250 |
110-90-70 |
750 |
152 |
437 |
Φ30x35 |
8-M12 |
170 |
137 |
||||||
|
3TG-E110X300 |
900 |
487 |
||||||||||||
|
3TG-E110X340 |
1020 |
527 |
||||||||||||
|
4TG-E100X250 |
1000 |
240 |
140 |
437 |
Φ20x30 |
8-M12 |
165 |
25 |
150 |
|||||
|
4TG-E100X300 |
1200 |
487 |
||||||||||||
|
4TG-E100X340 |
1360 |
527 |
||||||||||||
|
3TG-E100X250 |
100-80-60 |
750 |
437 |
Φ30x35 |
8-M12 |
165 |
||||||||
|
3TG-E100X300 |
900 |
487 |
||||||||||||
|
3TG-E100X340 |
1020 |
527 |
||||||||||||
|
3TG-E90X250 |
90-70-50 |
750 |
212 |
132 |
40 |
437 |
Φ30x35 |
6-M10X1 |
150 |
|||||
|
3TG-E90X300 |
900 |
487 |
||||||||||||
|
3TG-E90X340 |
1020 |
527 |
||||||||||||
|
2TG-E90X250 |
90-70 |
500 |
437 |
Φ30x35 |
6-M10X1 |
150 |
||||||||
|
2TG-E90X300 |
600 |
487 |
||||||||||||
|
2TG-E90X340 |
680 |
527 |
||||||||||||
|
3TG-E80X250 |
80-60-40 |
750 |
200 |
120 |
437 |
Φ20x30 |
6-M10X1 |
140 |
25 |
137 |
||||
|
3TG-E80X300 |
900 |
487 |
||||||||||||
|
3TG-E80X340 |
1020 |
527 |
||||||||||||
|
2TG-E80X250 |
80-60 |
500 |
437 |
Φ30x35 |
6-M10X1 |
140 |
||||||||
|
2TG-E80X300 |
600 |
487 |
||||||||||||
|
2TG-E80X340 |
680 |
527 |
||||||||||||
|
2TG-E70X250 |
70-50 |
500 |
169 |
109 |
30 |
437 |
Φ30x35 |
6-M8X1 |
130 |
|||||
|
2TG-E70X300 |
600 |
487 |
||||||||||||
|
2TG-E70X340 |
680 |
527 |
||||||||||||
|
2TG-E60X250 |
60-40 |
500 |
157 |
97 |
437 |
Φ20x30 |
6-M8X1 |
130 |
25 |
|||||
|
2TG-E60X300 |
600 |
487 |
||||||||||||
|
2TG-E60X340 |
680 |
527 |
||||||||||||
We provide multi stage telescopic hydraulic cylinder,5 stage hydraulic cylinder,4 stage telescopic hydraulic cylinderand three stage hydraulic cylinder,RFQ today!
在线联系供应商
Other supplier products
 |
Hydraulic Cylinder Forgings | Hydraulic cylinder is a hydraulic execution element that converts hydraulic energy into mechanical energy and performs straight-to-turn motion (or... |
 |
BM6 High Pressure Motor | Brief Introduction: BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, lon... |
 |
Forged Hydraulic Cylinder Head | Product: forged hydraulic cylinder head Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70... |
 |
Crane Truck Cylinder | Brief Introduction: The truck-mounted series cylinders include a front horizontal cylinder, a rear horizontal cylinder, a front vertical cylinde... |
 |
Forged Trunnion | Product: forged trunnion ak Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 7... |
Same products
 |
PLMFKA Pneumatic Roller Mill | 卖方: Hebei Pingle Flour Machinery Group Co., Ltd. | Type: and E-control Roller Mill Model: PLMFKA100×25×4 PLMFKA125×25×4 PLM... |
 |
PLMFP E-Control Roller Mill | 卖方: Hebei Pingle Flour Machinery Group Co., Ltd. | PLC and stepless speed-variable feeding techniqueto maintain the stock at the optimum height in... |
 |
Maize Flour Milling Plant Projects | 卖方: Hebei Pingle Flour Machinery Group Co., Ltd. | is a that integrates engineering design, research and development, manufacturing, sales and inst... |
 |
Maize Flour Milling Machine with Hammer Crusher | 卖方: Hebei Pingle Flour Machinery Group Co., Ltd. | . Owing to the advantages of convenient operation, simple training, compact structur... |
 |
Complete Set of Maize Flour Milling Plant | 卖方: Hebei Pingle Flour Machinery Group Co., Ltd. | Complete set of cleaning, conditioning, degermination, grinding, and automatic packing, suitable... |
