High Speed Tile Forming Machine
This series of high-speed tile roll forming machineis a new-generational type roof tile roll forming machinewith high speed and high-efficient, including decoiler system, sheet guiding system, roll forming system, pressing system, cutting system, auto-stacker system, hydraulic system, controlling system, etc.
The common thickness for final products is normally 0.4-0.8mm to different profiles and materials.We also have other roll forming machines, like the ridge cap and downpipe machines for roof use.
High-speed roof tile roll forming machine for saleon jinggongmachine.com, contact us right now!
Jinggong tile roll forming machine is one professional equipment to produce steel tile, which is comprehensively used in the large and medium-sized houses, villas, etc.
This line includes uncoiler, coil sheet guiding, roll forming, punching, post-cutting, hydraulic system, controlling system, and etc.
Technical Parameter Of High Speed Roll Forming Machine
|
Item |
parameter |
|
|
Modle |
HVM-183 |
|
|
Material |
Type |
Colored steel sheet |
|
Thickness |
||
|
Yield strength |
230-300 |
|
|
4-5 |
||
|
Roller material |
45#Steel with chrome coated |
|
|
Roller driven type |
Chain transmission |
|
|
Controller |
PLC |
|
|
Operation |
Touch screen+button |
|
|
Hydraulic system pressure |
13 |
|
|
Hydraulic station motor power |
||
|
Main motor power |
4 |
|
|
Total power |
||
|
Total weight |
About 10000 |
|
Technic Flow Of High-Speed Tile Forming Machine
Decoiling→guiding and feeding→roll forming→pressing→cut to length→run out table
Main Components of High-Speed Tile Forming Machine
Uncoiler
Cantilever-type fully automatic uncoiler adopts ultrasonic sensor technology and frequency inverter adjustment. The pressing-arm hydraulic driven power is optional. All electrical parts and hydraulic parts are installed inside of uncoiler frame.
Roll forming
Roll forming system consists of guiding device, machine base, transmission parts. and roll forming rollers, etc. The filming and pre-slitter device is optional.
Punching
The punching system adopts hydraulic type punching, which works stably and without scratch. The single punching or twin punching is optional.
Post-shearing device
Post-shearing device adopts frame type hydraulic shearing. The panel is cut stably and can avoid distortion. This design don't have any scrap in the process of cutting.
Hydraulic system
Hydraulic system is installed inside of machine base. The design is reasonable and compactly.
Controller
It adopts Mitsubishi PLC and frequency inverter adjustment to realize fully automatic operation. Operator can set parameters such as badges, length of panels quantities in the touch screen.
Zhejiang Jinggong Science & Technology Co., Ltd is a professional roll forming machine company. We provideSandwich Panel Machine, Roll Forming Machine, construction materials equipment, roof tile forming machine, glazed tile roll forming machine, steel frame machineand so on. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Seamer | Our panel seameris the auxiliary equipment that is specially designed for overlapping and seaming panels for roll forming machine. It is easy to op... |
 |
High Speed Tile Forming Machine | This series of high-speed tile roll forming machine is a new-generational type roof tile roll forming machine with high speed and high-efficient, i... |
 |
C&Z Changeable Purlin Forming Machine | The control system ofC&Z purlin forming machineincludes an industrial computer, communicating with PLC through RS485 connector. The system adop... |
 |
Guardrail Roll Forming Machine | Guardrail Forming Machineis the special forming equipment for producing the speedway guide rail. One shift every month can produce 600 tons (max). ... |
 |
Uncoiler | Our uncoiler machineis suitable for the uncoiling and conveying of thin metal sheets. The uncoiler for saleprimarily consists of the main machine, ... |
Same products
 |
Chinese GT-DG250 Rolling Machine | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-DG250 Rolling machine uses a pair of rolling assemble on the machine, and with ... |
 |
Double Spindle Lathe NL251D | Seller: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Seller: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
