High Speed Tile Forming Machine
This series of high-speed tile roll forming machineis a new-generational type roof tile roll forming machinewith high speed and high-efficient, including decoiler system, sheet guiding system, roll forming system, pressing system, cutting system, auto-stacker system, hydraulic system, controlling system, etc.
The common thickness for final products is normally 0.4-0.8mm to different profiles and materials.We also have other roll forming machines, like the ridge cap and downpipe machines for roof use.
High-speed roof tile roll forming machine for saleon jinggongmachine.com, contact us right now!
Jinggong tile roll forming machine is one professional equipment to produce steel tile, which is comprehensively used in the large and medium-sized houses, villas, etc.
This line includes uncoiler, coil sheet guiding, roll forming, punching, post-cutting, hydraulic system, controlling system, and etc.
Technical Parameter Of High Speed Roll Forming Machine
|
Item |
parameter |
|
|
Modle |
HVM-183 |
|
|
Material |
Type |
Colored steel sheet |
|
Thickness |
||
|
Yield strength |
230-300 |
|
|
4-5 |
||
|
Roller material |
45#Steel with chrome coated |
|
|
Roller driven type |
Chain transmission |
|
|
Controller |
PLC |
|
|
Operation |
Touch screen+button |
|
|
Hydraulic system pressure |
13 |
|
|
Hydraulic station motor power |
||
|
Main motor power |
4 |
|
|
Total power |
||
|
Total weight |
About 10000 |
|
Technic Flow Of High-Speed Tile Forming Machine
Decoiling→guiding and feeding→roll forming→pressing→cut to length→run out table
Main Components of High-Speed Tile Forming Machine
Uncoiler
Cantilever-type fully automatic uncoiler adopts ultrasonic sensor technology and frequency inverter adjustment. The pressing-arm hydraulic driven power is optional. All electrical parts and hydraulic parts are installed inside of uncoiler frame.
Roll forming
Roll forming system consists of guiding device, machine base, transmission parts. and roll forming rollers, etc. The filming and pre-slitter device is optional.
Punching
The punching system adopts hydraulic type punching, which works stably and without scratch. The single punching or twin punching is optional.
Post-shearing device
Post-shearing device adopts frame type hydraulic shearing. The panel is cut stably and can avoid distortion. This design don't have any scrap in the process of cutting.
Hydraulic system
Hydraulic system is installed inside of machine base. The design is reasonable and compactly.
Controller
It adopts Mitsubishi PLC and frequency inverter adjustment to realize fully automatic operation. Operator can set parameters such as badges, length of panels quantities in the touch screen.
Zhejiang Jinggong Science & Technology Co., Ltd is a professional roll forming machine company. We provideSandwich Panel Machine, Roll Forming Machine, construction materials equipment, roof tile forming machine, glazed tile roll forming machine, steel frame machineand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Characteristics of Rockwool Sandwich Panel Machine | The rockwool sandwichpanel machine and its production process realize that the rockwool and steel plate can be combined into a whole through automa... |
 |
H-Beam Straightening Machine | H-Beam StraighteningMachine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will hav... |
 |
Cut To Length Line | Thiscut to length line machineis special equipment for uncoiling, leveling, cutting and stacking the steel sheet according to the requirement of th... |
 |
Slitter | Our slitting machine is the auxiliary equipment used for slitting materials for roll forming machines. It is simple in structure and easy to adjust... |
 |
High Speed Roll Forming Machine | The high speed formingmachine is the new type line which is produced both by our company and Formia company from Finland. The complete machine adop... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | 卖方: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
