METAL BELLOW MECHANICAL SEALS
Metal Bellow seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. This seal type incorporates metal bellows as a spring-loading mechanism to maintain face contact when the seal is not pressurized and eliminates traditional secondary sealing requirements.
Types of Metal Bellow Mechanical Seal
In applications where the process temperature exceeds elastomer capabilities, metal bellows mechanical seals with graphite secondary seals are a good sealing option. Metal Bellows Single Seal is designed for high-temperature services typically found in chemical and petrochemical processes. Graphite secondary seals replace O-Rings to achieve the higher temperature requirements. Advanced bellows design distributes pressure uniformly across the span of the bellows plate to reduce stress and minimize weld fatigue. Component design replaces most OEM seals.
Materials Combination for Bellows Mechanical Seal
Face: Carbon, SiC, TC
Seat: Ceramic, SiC, TC
O-rings: NBR, EPDM, VITON, Aflas, FEP, Kalrez, Chemraz, Grofoil, etc.
Spring: SS316, hastelloy C, AM350
Metal parts: SS316, hastelloy C
Recommended Applications of Metal Bellow Seals
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment
Features of Metal Bellow Mechanical Seal
For unstepped shaftsSingle seal, balanced, independent of direction of rotationMetal bellows rotatingAsymmetric bellows form results in even stress distribution with benefits of greater strength and higher rate of flexibilty; seal is bi-rotational and inherently pressure balanced.Smooth profile is resistant to clogging and therefore ideal for slurries and fibrous liquids. Similarly, seal unit is easy to clean and sterilize in place.Unit construction ensures a simple-to-fit seal, with superior heat dissipation paths. Seal unit is reliable and does not wear the shaft.Graphite secondary seals for high-temperature performanceAdvanced bellows design for maximum cycle lifeRotary bellows for enhanced performance in slurry and particulate servicesHydraulically-balanced seal designBlister-resistant carbonProven heat-treated AM 350 bellows constructionGraphite secondary seals for high-temperature performance
Difference between Metal Bellow Seal and Ordinary Mechanical Seal
The welded metal bellows mechanical seal has good floating and random compensation, which can compensate for the leakage caused by wear, axial movement and vibration. Welded metal bellows itself as the elastic element and the sealing function, so there is no need to design the general dynamic auxiliary push ring spring type mechanical seal ring, thus avoiding the fine particles due to dynamic auxiliary seal ring caused by the obstruction, dynamic auxiliary seal and high temperature because of its axial friction resistance reduction the seal compensation ability of the problem.
Metal bellows mechanical seal with no auxiliary seal ring, reduce a leak; at the same time reduce the friction resistance compensation mechanism, improve the following; in the petrochemical industry, welding sealing temperature is not restricted by auxiliary seal bellows; for PTFE bellows seal can be used in the corrosive medium. Its drawback is that some bellows have the smaller elastic force and need to add auxiliary springs.
Welded metal bellows are made by interlacing and closely welding each internal and external diameters of each wave plate, so no matter whether they are used as the stationary or rotary type, it is not necessary to consider the problem of rotation. Welded metal bellows can be made from precipitation hardening stainless steel, high-temperature nickel based materials and chrome-nickel corrosion resistant materials. Therefore, welded metal bellows can be applied to a wide range of temperature (-117 C - 426 C), and various acid, alkali and salt media. The selection of different thickness and layers of the wave plate makes it withstand a pressure of up to 7MPa in a special pump. The design of welded metal bellows seal is generally balanced, so its pressure bears little influence on the surface pressure. The welded metal bellows mechanical seal is not only suitable for nonhydrocarbon media, but also for flash hydrocarbon medium. Compared with the ordinary mechanical seal, its service life has been greatly improved, so it has a higher ratio of performance and price.
Sealconis a professionalmetal bellow seal manufacturer, we provide hydrocarbon pump mechanical seal, high temperature mechanical seal, edge welded metal bellows, metal bellow mechanical seal, bellow type mechanical seal, china metal bellowsand etc. For more information, please feel free to contact us!
Send product request
Other supplier products
 |
Rubber Seal | Rubber seal is one of the common base components in sealing device, and plays an important role in the leaking and sealing. It is composed of one o... |
 |
Stainless Steel Seal | Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as a... |
 |
Analysis And Maintenance Scheme Of Leakage Point Of Mechanical Seal For Pump | Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable... |
 |
PTFE TEFLON BELLOW MECHANICAL SEALS | PTFE Teflon Bellow Mechanical Sealfor Sale China PTFE Teflon Bellow sealhas been widely applied in the area of atomic energy, defense, aerospace, e... |
 |
Ceramic Seal | Ceramic material refers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advant... |
Same products
 |
Chinese GT-DG250 Rolling Machine | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-DG250 Rolling machine uses a pair of rolling assemble on the machine, and with ... |
 |
Double Spindle Lathe NL251D | Seller: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Seller: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
