METAL BELLOW MECHANICAL SEALS
Metal Bellow seals are ideal for high temperature applications and harsh chemical services where elastomers cannot be used effectively. This seal type incorporates metal bellows as a spring-loading mechanism to maintain face contact when the seal is not pressurized and eliminates traditional secondary sealing requirements.
Types of Metal Bellow Mechanical Seal
In applications where the process temperature exceeds elastomer capabilities, metal bellows mechanical seals with graphite secondary seals are a good sealing option. Metal Bellows Single Seal is designed for high-temperature services typically found in chemical and petrochemical processes. Graphite secondary seals replace O-Rings to achieve the higher temperature requirements. Advanced bellows design distributes pressure uniformly across the span of the bellows plate to reduce stress and minimize weld fatigue. Component design replaces most OEM seals.
Materials Combination for Bellows Mechanical Seal
Face: Carbon, SiC, TC
Seat: Ceramic, SiC, TC
O-rings: NBR, EPDM, VITON, Aflas, FEP, Kalrez, Chemraz, Grofoil, etc.
Spring: SS316, hastelloy C, AM350
Metal parts: SS316, hastelloy C
Recommended Applications of Metal Bellow Seals
Process industry
Oil and gas industry
Refining technology
Petrochemical industry
Chemical industry
Hot media
Cold media
Highly viscous media
Pumps
Special rotating equipment
Features of Metal Bellow Mechanical Seal
For unstepped shaftsSingle seal, balanced, independent of direction of rotationMetal bellows rotatingAsymmetric bellows form results in even stress distribution with benefits of greater strength and higher rate of flexibilty; seal is bi-rotational and inherently pressure balanced.Smooth profile is resistant to clogging and therefore ideal for slurries and fibrous liquids. Similarly, seal unit is easy to clean and sterilize in place.Unit construction ensures a simple-to-fit seal, with superior heat dissipation paths. Seal unit is reliable and does not wear the shaft.Graphite secondary seals for high-temperature performanceAdvanced bellows design for maximum cycle lifeRotary bellows for enhanced performance in slurry and particulate servicesHydraulically-balanced seal designBlister-resistant carbonProven heat-treated AM 350 bellows constructionGraphite secondary seals for high-temperature performance
Difference between Metal Bellow Seal and Ordinary Mechanical Seal
The welded metal bellows mechanical seal has good floating and random compensation, which can compensate for the leakage caused by wear, axial movement and vibration. Welded metal bellows itself as the elastic element and the sealing function, so there is no need to design the general dynamic auxiliary push ring spring type mechanical seal ring, thus avoiding the fine particles due to dynamic auxiliary seal ring caused by the obstruction, dynamic auxiliary seal and high temperature because of its axial friction resistance reduction the seal compensation ability of the problem.
Metal bellows mechanical seal with no auxiliary seal ring, reduce a leak; at the same time reduce the friction resistance compensation mechanism, improve the following; in the petrochemical industry, welding sealing temperature is not restricted by auxiliary seal bellows; for PTFE bellows seal can be used in the corrosive medium. Its drawback is that some bellows have the smaller elastic force and need to add auxiliary springs.
Welded metal bellows are made by interlacing and closely welding each internal and external diameters of each wave plate, so no matter whether they are used as the stationary or rotary type, it is not necessary to consider the problem of rotation. Welded metal bellows can be made from precipitation hardening stainless steel, high-temperature nickel based materials and chrome-nickel corrosion resistant materials. Therefore, welded metal bellows can be applied to a wide range of temperature (-117 C - 426 C), and various acid, alkali and salt media. The selection of different thickness and layers of the wave plate makes it withstand a pressure of up to 7MPa in a special pump. The design of welded metal bellows seal is generally balanced, so its pressure bears little influence on the surface pressure. The welded metal bellows mechanical seal is not only suitable for nonhydrocarbon media, but also for flash hydrocarbon medium. Compared with the ordinary mechanical seal, its service life has been greatly improved, so it has a higher ratio of performance and price.
Sealconis a professionalmetal bellow seal manufacturer, we provide hydrocarbon pump mechanical seal, high temperature mechanical seal, edge welded metal bellows, metal bellow mechanical seal, bellow type mechanical seal, china metal bellowsand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Seal Spare Parts Sleeve | In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal... |
 |
MECHANICAL SEALS FOR PUMP | Mechanical seal for pump is a kind of dynamic seal assembly, which is widely used on the rotating shaft. It is also known as the end seal. Consisti... |
 |
MECHANICAL SEALING MATERIAL | Stainless Steel Seal Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stain... |
 |
Ceramic Mechanical Seal | Ceramic materialrefers to inorganic non-metallic materials made of natural or synthetic compounds through forming and sintering. It has the advanta... |
 |
O.E.M MECHANICAL SEALS | With mechanical seal factory, Sealconis able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality ... |
Same products
 |
NCM-4.8型内燃道岔打磨机 | 卖方: 842518 | NCM-4.8型内燃道岔打磨机是适用于铁路行业的专用机械，该机主要用于钢轨道岔的养护作业，也可用于普通钢轨的养护作业。该机具有工作效率高、操作简便、上下道快速、适应范围广等特点，受到用户的广泛好评。 |
 |
72V智能锂电仿形打磨机 | 卖方: 842518 | 1. 72V锂电动力直流电控系统，带过流、过压、欠压、高温等安全保护功能 2. 双操作系统，既可以机械式摇轮进给，又可以电子进给 3. 电子进给分档式设计，不同打磨阶段，进给的精度不同，提供... |
 |
36V锂电捣固镐 | 卖方: 842518 | 产品优点： 1. 智能数显，实时显示剩余电量和使用时间（业内首创） 2. 三级减震，减少操作者的工作疲劳 3. 电池通过UN38.3国际安全认证和GB34570双重安全认证 4. 高海拔正常使用... |
 |
ND-5内燃冲击捣固镐 | 卖方: 842518 | ND-5内燃冲击捣固镐是一种轻便高效的捣固工具，它具有结构紧凑、重量轻、效率高、操作简便、省力、减震效果好等特点，适用于多种路况的破碎及捣固作业。 适用于混凝土、砖石、沥青、岩石、泥土等破碎及... |
 |
ND-4内燃捣固镐 | 卖方: 842518 | 内燃捣固镐是铁路道床养护的一种小型养路机械，主要适用于道岔及繁忙线路上利用列车间隔进行的捣固作业，它具有重量轻、体积小、性能优良、坏损率低、上下道方便迅速、操作轻便等优点。 |
