GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
The GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification system. It has precise interface and multi-functions including verification, storage and query. The GF6018A multimeter calibrator adopts color LCD screen, chart character display is clear, with high precision, stable and reliable, convenient operation and flexible characteristics. It fully meets ISO17025 laboratory standards and is a good ideal test equipment for electrical engineers.
PARAMETERS
| Electrical parameters | ||
|---|---|---|
| Power supply | Single phase AC 220V±10% or 110V±10%, 50/60HzAC | |
| AC Voltage output | ||
| range | 200mV, 400mV, 2000mV, 4000mV, 20V, 100V, 200V, 500V, 1000V; max 1050V |
|
| Range 20V-1000V | Accuracy | ±(0.03%RD+0.02%FS) |
| Stability | ≤0.01% FS /60s | |
| Range 200mV-4000mV | Accuracy | ±(0.3%RD+0.2%FS) |
| Stability | ≤0.04% FS /60s | |
| Load capacity | 20VA | |
| Waveform distortion | ≤0.3% | |
| Adjustable Range | 0-120% FS (1000V not included) | |
| Fineness | 5×10-5 | |
| AC Current Output | ||
| Range | 2mA, 4mA, 20mA, 40mA, 0.2A, 0.5A, 2A, 5A, 10A, 20A; max 24A | |
| Range 0.2A-20A | Accuracy | ±(0.03%RD+0.02%FS) |
| Stability | ≤0.01% FS /60s | |
| Range 2mA-40mA | Accuracy | ±(0.3%RD+0.2%FS) |
| Stability | ≤0.04% FS /60s | |
| Load capacity | 20VA | |
| Waveform distortion | ≤0.3% | |
| Adjustable Range | 0-120% FS | |
| Fineness | 5×10-5 | |
| Frequency Output | ||
| Range | 45-65Hz | |
| Fineness | 0.001Hz | |
| Accuracy | 0.002Hz | |
| Harmonic Wave | ||
| Times | 2-31 | |
| Extent | 0-20% | |
| Each harmonic phase fineness | 0.01·N (N is harmonic order) | |
| DC voltage output | ||
| Range | 200mV, 400mV, 2000mV, 4000mV, 20V, 40V, 100V, 200V, 400V, 1000V; max 1050V |
|
| Load capacity | 20W | |
| Adjustable range | 0-110% FS (1000V not included) | |
| Adjustable fineness | 5×10-5 | |
| Stability | ≤0.01% FS /60s (peak-peak value) | |
| Accuracy | ±(0.03%RD+0.02%FS) | |
| Ripple wave | ≤1% FS | |
| DC current output | ||
| Range | 20uA, 40uA, 200uA, 400uA, 2mA, 4mA, 20mA, 40mA, 0.2A, 1A, 2.5A, 5A, 10A, 20A; max 22A |
|
| Load capacity | 20W | |
| Adjustable Range | 0-110% FS (1000V not included) | |
| Adjustable Fineness | 5×10-5 | |
| Stability | ≤0.01% FS /60s (peak-peak value) | |
| Accuracy | ±(0.06%RD+0.04%FS) | |
| Ripple wave | ≤1% FS | |
| Resistance box | ||
| Range | 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10 kΩ, 20kΩ, 50KΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ, 5MΩ, 10MΩ, 20MΩ | |
| Fineness | 0.02% | |
| Adjustable Range | 0-100%FS | |
| Accuracy | ±(0.3%RD+0.2%FS) | |
| Clamp meter range | ||
| 200A | Accuracy | ±0.2% |
| 600A | Accuracy | ±0.5% |
| 1000A | Accuracy | ±1% |
| Dot frequency square wave output | ||
| Range | 1kHz, 5kHz, 10kHz, 50kHz, 100kHz, 200kHz, 1000kHz | |
| Square wave amplitude | 4.5V | |
| Setting accuracy | 5×10-5 | |
| Communication Port | ||
| Communication Port | RS232, USB | |
| Standard | ||
| Standard | JJG124-2005; JJF1587-2016; IEC61010, IEC 61000, IEC 61326 | |
| Safety | ||
| Isolation protection | IEC 61010-1:2001 | |
| Measurement Category | 300 V CAT III, 600 V CAT II | |
| Degree of protection | IP20 | |
| Declaration of conformity | CE, CNAS certified | |
| Mechanical parameters | ||
| Dimension (L×W×H) (mm) | 440x360x160 | |
| Weight (kg) | 12 | |
| Environmental conditions | ||
| Operating temperature | 20°C±10°C | |
| Storage conditions | -30°C to 60°C | |
| Relative humidity | ≤85%RH | |
| (1) FS means range, the same as below; (2) RD means the setted harmonic content, harmonic can be a single output, also multiple output. |
||
Send product request
Other supplier products
 |
GF6019D HIGH PRECISION ENERGY METER TEST EQUIPMENT | This instrument is a high precision DC energy meter test equipment.The highest accuracy is 0.02%. And it has wide test range 0-115V and 0-600A. It ... |
 |
GF302D1 PORTABLE THREE-PHASE kWH METER TEST DEVICE | GF302D1便携式三相电能表测试装置是一种误差测量仪器。GF302D1 具有 0.05% 的高精度、便携设计和对环境的高耐受性。特点： 1．量程：电压：0-500V；电流：0-120A；2．可存储500个测量数据；3．重量：12.8 4．可测量频率、谐波、功率因数；5．带PC口、RS232通... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
Q8A1:high precision nickel mental core 5A clamp on current probe | The model Q8A1 current probe/clamp on ct is based on AC transformer technology for use in measurement of AC current, it is suitable for 5A, 10A cab... |
 |
SINGLE PHASE ELECTRICITY METER TESTER | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, used for testing single phase electricity meters er... |
Same products
 |
hhbb electric chain hoist | Seller: 869821 | hhbb electric chain hoist • We are professional with electric chain hoist with rich p... |
 |
mini electric hoist with trolley | Seller: 869821 | mini electric hoist with trolley Thewith trolley combines vertical lifting with horizontal m... |
 |
mini electric hoist | Seller: 869821 | mini electric hoist The is a compact lifting solution for workshops, garages, warehouses, sm... |
 |
manual Lever Hoist | Seller: 869821 | manual Lever Hoist Hoisting supplies manual lever hoists for lifting, pulling, tensioning an... |
 |
manual chain hoist supplier | Seller: 869821 | manual chain hoist supplier Hoisting is a professional Supplier in China with more than 30 y... |
