GF6018A CLAMP TYPE MULTIMETER CALIBRATOR

This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.

The GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification system. It has precise interface and multi-functions including verification, storage and query. The GF6018A multimeter calibrator adopts color LCD screen, chart character display is clear, with high precision, stable and reliable, convenient operation and flexible characteristics. It fully meets ISO17025 laboratory standards and is a good ideal test equipment for electrical engineers.

PARAMETERS

Electrical parameters
Power supply		Single phase AC 220V±10% or 110V±10%, 50/60HzAC
AC Voltage output
range		200mV, 400mV, 2000mV, 4000mV, 20V, 100V, 200V, 500V, 1000V; max 1050V
Range 20V-1000V	Accuracy	±(0.03%RD+0.02%FS)
	Stability	≤0.01% FS /60s
Range 200mV-4000mV	Accuracy	±(0.3%RD+0.2%FS)
	Stability	≤0.04% FS /60s
Load capacity		20VA
Waveform distortion		≤0.3%
Adjustable Range		0-120% FS (1000V not included)
Fineness		5×10-5
AC Current Output
Range		2mA, 4mA, 20mA, 40mA, 0.2A, 0.5A, 2A, 5A, 10A, 20A; max 24A
Range 0.2A-20A	Accuracy	±(0.03%RD+0.02%FS)
	Stability	≤0.01% FS /60s
Range 2mA-40mA	Accuracy	±(0.3%RD+0.2%FS)
	Stability	≤0.04% FS /60s
Load capacity		20VA
Waveform distortion		≤0.3%
Adjustable Range		0-120% FS
Fineness		5×10-5
Frequency Output
Range		45-65Hz
Fineness		0.001Hz
Accuracy		0.002Hz
Harmonic Wave
Times		2-31
Extent		0-20%
Each harmonic phase fineness		0.01·N (N is harmonic order)
DC voltage output
Range		200mV, 400mV, 2000mV, 4000mV, 20V, 40V, 100V, 200V, 400V, 1000V; max 1050V
Load capacity		20W
Adjustable range		0-110% FS (1000V not included)
Adjustable fineness		5×10-5
Stability		≤0.01% FS /60s (peak-peak value)
Accuracy		±(0.03%RD+0.02%FS)
Ripple wave		≤1% FS
DC current output
Range		20uA, 40uA, 200uA, 400uA, 2mA, 4mA, 20mA, 40mA, 0.2A, 1A, 2.5A, 5A, 10A, 20A; max 22A
Load capacity		20W
Adjustable Range		0-110% FS (1000V not included)
Adjustable Fineness		5×10-5
Stability		≤0.01% FS /60s (peak-peak value)
Accuracy		±(0.06%RD+0.04%FS)
Ripple wave		≤1% FS
Resistance box
Range		10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10 kΩ, 20kΩ, 50KΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ, 5MΩ, 10MΩ, 20MΩ
Fineness		0.02%
Adjustable Range		0-100%FS
Accuracy		±(0.3%RD+0.2%FS)
Clamp meter range
200A	Accuracy	±0.2%
600A	Accuracy	±0.5%
1000A	Accuracy	±1%
Dot frequency square wave output
Range		1kHz, 5kHz, 10kHz, 50kHz, 100kHz, 200kHz, 1000kHz
Square wave amplitude		4.5V
Setting accuracy		5×10-5
Communication Port
Communication Port		RS232, USB
Standard
Standard		JJG124-2005; JJF1587-2016; IEC61010, IEC 61000, IEC 61326
Safety
Isolation protection		IEC 61010-1:2001
Measurement Category		300 V CAT III, 600 V CAT II
Degree of protection		IP20
Declaration of conformity		CE, CNAS certified
Mechanical parameters
Dimension (L×W×H) (mm)		440x360x160
Weight (kg)		12
Environmental conditions
Operating temperature		20°C±10°C
Storage conditions		-30°C to 60°C
Relative humidity		≤85%RH
(1) FS means range, the same as below; (2) RD means the setted harmonic content, harmonic can be a single output, also multiple output.

Other supplier products

	Q13: MA output 100A AC clamp on current probe	The Q13 clamp on current probe is a high accuracy mini probe for measurements to 120A AC.It can output 1mA/A, 1mV/A or 10mV/A etc. The Q13 Series c...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	The GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification system. It has...
	D20: voltage output 200A AC/DC CURRENT PROBE	The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a rechargeable multimeter battery or from a 9 V powe...
	GF312V2 PIRTABLE 3-PHAASE WATT-HOUR METER CALIBRATOR	GF312V2 is mainly used to test the error of single-phase energy meter,three-phase kWH meter and Various active and reactive energy meters. The the ...
	P18: 200A double ratio voltage output AC current clamp	The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instr...

供应产品

Same products

	330037 Communication Unit Change-Over Table HS50 Original Used	卖方: 广东聚广恒自动化设备有限公司	46587901 AI Accessories Green Belt Flat belt smt spare part Original Synthetic Gear Oil SHC 630 C...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	卖方: 782364	This GF6018A high precision multi-product calibrator is compliance with national verification reg...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	卖方: 782364	DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	卖方: 782364	This GF6018A high precision multi-product calibrator is compliance with national verification reg...
	GF6018A CLAMP TYPE MULTIMETER CALIBRATOR	卖方: 782364	APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr...