GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
APPLICATION
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
Send product request
Other supplier products
 |
GF112D 1-PHASE ELECTRICITY METER TESTER | TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-phase power meter on spot. It can test harmonic,power... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
FQ-RCT02:6000A flexible ROGOWSK coil current sensor | The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil. It is suitable for large current measuring. They... |
 |
GF312V2 PIRTABLE 3-PHAASE WATT-HOUR METER CALIBRATOR | GF312V2 is mainly used to test the error of single-phase energy meter,three-phase kWH meter and Various active and reactive energy meters. The the ... |
 |
Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT | The model Q8A2 permalloy core ac current clamp ct with high accuracy up to 0.1% has been designed for use with energy meter tester, multimeters, re... |
Same products
 |
330037 Communication Unit Change-Over Table HS50 Original Used | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | pantallas china brand bearing bearing supplier mobil dte 10 Reflow Wave Soldering Chain Cleaner T... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Seller: 782364 | APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr... |
