.

FQ-RCT02:6000A flexible ROGOWSK coil current sensor

The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil. It is suitable for large current measuring. They combine the benefits of a thin, flexible, clip-around Rogowski (sense) coil with a signal conditioner providing accurate, true rms measurement, of voltage output 100mV/kA. FEATURES High times harmonic measurement; Conforms to EN 61010, 1000V CAT III; Low phase shift for power measurement; Holding wire diameter: φ305mm/190mm/120mm; 100mV/kA or 85mV/kA or 50mV/kA output signal; Excellent linearity 0.2% for current measurement; Designed for DMMs, oscilloscopes, recorders, power and harmonic meters; Basic parameters : Accuracy :<1% @25°C (45-65Hz) Current range:1A - 100kA Frequency :10Hz - 20kHz Lead length:2.5m Degree of protection:IP67 Weight (g):150g - 230g Max output:10kA or 100kA



Send product request

To: 782364
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device...
GF302D THREE-PHASE ENERGY METER TEST EQUIPMENT
GF302D THREE-PHASE ENERGY METER TEST EQUIPMENT The product GF302D is a portable three-phase kWH meter test equipment,which are mainly used to test the error of single-phase or three-phase energy...
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH GF102 single-phase energy meter test bench used to test the AC energy meter error. It can test 1pc or 3pcs energy meters at the same time. The accu...
GF312B2 PORTABE 3-PHASE REFRENCE METER WITH CLAMP ON CT
GF312B2 PORTABE 3-PHASE REFRENCE METER WITH CLAMP ON CT GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be appli...
GF3000 STATIONARY MULTI STATIONS POWWER METER TEST BED
GF3000 STATIONARY MULTI STATIONS POWWER METER TEST BED The GF3000 series stationary three phase energy meter test bench is a fully automatic system that enables simultaneous, multi-position calibration ...
All supplier products

Same products

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp Seller: 782364 The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insu...
D20: voltage output 200A AC/DC CURRENT PROBE
D20: voltage output 200A AC/DC CURRENT PROBE Seller: 782364 The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a ...
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator Seller: 782364 The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight space...
FQ-RCT02:6000A flexible ROGOWSK coil current sensor
FQ-RCT02:6000A flexible ROGOWSK coil current sensor Seller: 782364 The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil...
Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp Seller: 782364 The model Q150 current transformer clamp can be used in large current situation and cooperate to ...