GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
APPLICATION
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
在线联系供应商
Other supplier products
 |
D20: voltage output 200A AC/DC CURRENT PROBE | The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a rechargeable multimeter battery or from a 9 V powe... |
 |
GF1021 PORTABLE 1-PHASE ENERGY METER TEST SYSTEM | The product is a single-phase watt-hour meter test system. It can measure a variety of electric energy meters.The product can be a AC voltage sourc... |
 |
单相电表测试仪 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数——电压、电流、有功功率、无功功率、视在功率、谐波、相角、功率因数、频率、能量等。 |
 |
P8:wholesale economic type 5A AC current clamp CT | This current clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC current clamp ct is a cheap a... |
 |
XQ20:high precision 200A AC MINI split core clamp on current sensor | The model XQ20 clamp on current sensor is suitable for 200A cable online measurement.It output 0-200mA or 0-100mA AC signal for measuring and analy... |
Same products
 |
EnruigeOK后视倒车尾门把手摄像头适用于2014-2015雪佛兰Silverado/GMC Sierra | 卖方: 深圳市恩瑞格科技有限公司 | 特征：*高品质和高性能采用高品质材料制造，达到或超过OEM标准，非常稳定。*安全停车后驻车倒车摄像头通过120°广角摄像装置，车后障碍物清晰可见。*易于安装这款倒车摄像头将与原始设备制造... |
 |
EnruigeOK双镜头福特Transit Van第三刹车灯后视倒车摄像头2014-2024 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*双镜头福特Transit倒车摄像头。其独特的设计允许一个安装有2个具有不同视点的摄像头。一个倒车摄像头用于查看交通情况，另一个用于查看拖车挂接装置和后保险杠。*制动灯更换摄像头。这款刹车... |
 |
EnruigeOK双镜头福特Transit定制货车第三刹车灯倒车摄像头2016至今 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*制动灯更换摄像头。这款刹车灯倒车摄像头旨在取代现有的刹车灯，便于工厂安装。*双镜头倒车摄像头。其独特的设计允许一个安装有2个具有不同视点的摄像头。一个倒车摄像头用于查看交通情况，另一个用... |
 |
EnruigeOK 双后视摄像头套件 适用于大众 Crafter 奔驰 Sprinter W639 刹车灯后部 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*完整的停车辅助：包括一个双镜头倒车摄像头和一个7英寸TFT-LCD显示器。显示器在倒车时显示后置摄像头录像，确保更安全的停车。*双镜头！！！双镜头倒车摄像头：一个（CH1）显示车辆后方的... |
 |
EnruigeOK 9英寸四分屏监视器，适用于卡车巴士RV摄像头的4CH汽车后视监视器 | 卖方: 深圳市恩瑞格科技有限公司 | 特征：*4个分体式视频显示器。显示格式为16:9。配有红外遥控器。*4路视频输入，倒车时自动切换到V4。支持调整屏幕角度。*自动识别输入信号，也可以使用没有统一格式的摄像头。*后视，图像可以左右... |
