Dental Tooth Materials PEEK R&D Series
Dental peek materialR&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field.
Specification ofMaterials PEEKTeethR&D Series
|
Material Properties |
Test Method |
Conditions |
Units |
770G |
|
Mechanical Data |
||||
|
Tensile Strength |
ISO 527 |
B reak,23℃ |
MPa |
- |
|
Y ield,23℃ |
MPa |
100 |
||
|
Tensile Elogation |
ISO 527 |
Break,23℃ |
% |
45 |
|
Flexural Strength |
ISO 178 |
Break,23℃ |
MPa |
- |
|
Y ield,23℃ |
MPa |
165 |
||
|
Fleoural Modulus |
ISO 178 |
23℃ |
Gpa |
|
|
Compressive Strength |
ISO 604 |
23℃ |
MPa |
125 |
|
Charpy Impact Strength |
ISO 179/leA |
Notched |
kJm-2 |
7 |
|
ISO 179/IU |
Unnotched |
kJm-2 |
- |
|
|
Izod Impact Strength |
ISO 180/A |
Notched |
kJm-2 |
|
|
ISO 180/U |
Unnotched |
kJm-2 |
- |
|
|
Mould Shrinkage |
ISO 294-4 |
Along flow |
% |
1 |
|
Across flow |
% |
|||
|
Thermal Data |
||||
|
Melting Point |
ISO 11357 |
℃ |
343 |
|
|
Glass Tansition (Tg) |
ISO 11357 |
Onset |
℃ |
143 |
|
Special Heat Capacity |
DSC |
23℃ |
kj kg-1℃-1 |
|
|
Coefficient of Thermal Expansion |
ISO 11359 |
Along flow below Tg |
ppm K-1 |
45 |
|
Along flow above Tg |
ppm K-1 |
120 |
||
|
Heat Deflecion Temperature |
ISO 75A-f |
℃ |
152 |
|
|
Thermal Conductivity |
ASTM C177 |
23℃ |
W m-1K-1 |
|
|
Flow |
||||
|
MeltIndex |
ISO 1133 |
380℃,5kg |
g10min-1 |
10 |
|
Miscellaneous |
||||
|
Density |
ISO 1186 |
Crystalline |
gcm-3 |
|
|
Amorphous |
gcm-3 |
|||
|
Shore D Hardness |
ISO 868 |
23℃ |
85 |
|
|
Water Absorption(3.2mm thick Tensile Bar) |
ISO 62-1 |
24h,23℃ |
% |
|
|
by immersion |
Equilib riu m,23℃ |
% |
||
|
Electrical Data |
||||
|
Dielectric Strength |
IEC 60243-1 |
2mm |
kV mm-1 |
23 |
|
Comparative Tracking Index |
IEC 60112 |
V |
150 |
|
|
Dielectric Constant |
IEC 60250 |
23℃,1kHz |
||
|
23℃,50kHz |
3 |
|||
|
Loss Tangent |
IEC 60250 |
23℃,1MHz |
||
|
Volume Resistivity |
IEC 60093 |
23℃,1V |
Ω cm |
10 16 |
|
275℃ |
Ω cm |
10 9 |
||
As one of peek suppliers, we can also offer sorts of peek removable denturefor sale, if you have needs, please contact us.
If you want to know more about peek in dentistry ppt, please visit our website.
Zhongyan (ZYPEEK) is a leading polyetheretherketone peek raw materialmanufacturer, providing types of natural peek material. Our polyetheretherketone PEEK raw materials are widely used in profile, medical, wire & cables, energy development, and transportation.
Send product request
Other supplier products
 |
CA Series-550CA30 PEEK Carbon Fiber Reinforcement | CA Series-550CA30 PEEK carbon fiberreinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly... |
 |
CA Series-330CA30 PEEK Carbon Fiber Reinforcement | CA Series-330CA30 peek fccarbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bear... |
|
|
Dental Tooth Materials PEEK R&D Series | Dental peek materialR&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Speci... |
 |
Grade G PEEK Pure Resin Pellets | Good toughness and impact resistance, it can be disinfected using steam, ethvi alcohol and rays, etc. It has been widely used in the medical, pharm... |
 |
Peek Tube Material | Peek Tube Material Peek plastic materialhas great machinability, excellent dimensional stability, high-temperature resistance, creep resistance ... |
Same products
|
|
Dental Tooth Materials PEEK R&D Series | Seller: Jilin Joinature Polymer Co.,Ltd. | Dental peek materialR&D Series has good wear resistance and high mechanical strength. It is m... |
 |
Grade PF PEEK Pure Resin Fine Powder | Seller: Jilin Joinature Polymer Co.,Ltd. | The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can b... |
 |
Grade G PEEK Pure Resin Pellets | Seller: Jilin Joinature Polymer Co.,Ltd. | With good toughness and impact resistance, Grade G peek pelletscan be disinfected using steam, et... |
 |
Grade GL Glass Filled Fiber Reinforced PEEK | Seller: Jilin Joinature Polymer Co.,Ltd. | PEEK-GL series, is a glass fiber composite modified PEEK materials, currently available from 5% -... |
 |
Grade FC Super Wear Resistant PEEK | Seller: Jilin Joinature Polymer Co.,Ltd. | PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear ... |
