Overhead Line Fittings for Electric Power
Vibration Dampers for OPGW (4D)
COMPONENT
zincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.
FUNCTION
It eliminates or reduces the vibrations caused by many factors during the cable operations, and protects the cables and hardware fittings.
Description
| Model |
Size of Aluminum Clamp(mm) |
Range of Clamping Length(mm) |
Total Length L(mm) |
Length of Clamp (mm) |
Height of Clamp (mm) |
Diameter of Steel Armor Rods(mm) |
Weight(KG) |
| 4D-40 |
34 |
34.0-29.5 |
542 |
66 |
94 |
11 |
4.7 |
| 30.5 |
30.5-27.0 |
96 |
| 27.6 |
27.6-24.5 |
98 |
| 4D-30 |
27 |
27.0-22.5 |
383 |
52 |
70 |
9 |
2.5 |
| 23.4 |
23.4-19.5 |
72 |
| 20.3 |
20.3-16.5 |
73 |
| 4D-20 |
18 |
18.0-15.0 |
330 |
52 |
65 |
7.5 |
1.4 |
| 16 |
16.0-13.3 |
63 |
| 14 |
14.0-12.2 |
62 |
CHARACTERISTIC
It adopts typical Hello's design. Frequency protection is distributed enough to the range of 6Hz -150Hz wide frequency zone. And in this range, there are four resonance frequencies.
FACTOR OF VIBRATION
Length of span, tensile magnitude, wind speed, wind direction, landform, and the structure and size of the cable.
NOTEThe aluminum clamps for 4D—20 are 27.0, 23.4, 20.3, 18.0, 16.0, 14.0
The aluminum clamps for 4D—30 are 27.0, 23.4, 20.3, 1 8.0, 16.0, 1 4.0
Other supplier products
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Cable Margin Supporters for ADSS (AYLJ)The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cab... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
PROTECTIONArmor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
CONDITIONS FOR THE USAGEExcess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter l... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
供应产品
Same products
