Down-Leading Clamp for ADSS/OPGW
FUNCTION
It fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition.
CONDITIONS OF USAGE
Initial or end poles/towers of cable lines, or connecting poles/towers, etc.
USAGE
To install one every 1.5-2meters.
Description
| Model |
Type of structure |
Cable Diameter(m) |
Estimated Weight (kg) |
Note |
| YDZ0116 |
Heated Zincification |
9.0-11.6 |
0.75 |
For towers |
| YDZ0143 |
11.7-14.3 |
0.75 |
For towers |
| YDZ0170 |
14.4-17.0 |
0.75 |
For towers |
| YDZ0197 |
17.1-19.7 |
0.75 |
For towers |
| YGD0116 |
Stainless Steel |
9.0-11.6 |
0.55 |
For poles |
| YGD0143 |
11.7-14.3 |
0.55 |
For poles |
| YGD0170 |
14.4-17.0 |
0.55 |
For poles |
| YGD0197 |
17.1-19.7 |
0.55 |
For poles |
NOTE**The standard configuration of down-leading clamp is for poles with 300mm diameter.
Please provide diameter size of the pole with you order if you need it for different type of poles.
Other supplier products
|
|
Overhead Line Fittings for Electric Power |
MaterialDead-ends:High-tensile galvanized steel.ApplicationSuited for the full tensioning of groundwire or staywire on transmission and distributr... |
|
|
Tension Set for Short Span ADSS |
Tension Set for Short Span ADSSCOMPONENTsingle layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc.CHARACTERISTICSimpl... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
|
Strain Clamp / Dead End Clamp for ADSS |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
CONDITIONS FOR THE USAGEExcess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter l... |
All supplier products
Same products
