Double Dead Ends Clamp for OPGW
COMPONENT
inner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, etc.
CHARACTERISTIC
1. It has all capabilities and performances that dead-end suspension has.
2. The three-layer outer armor rods improve the mechanical intensity of the clamp, making it realizable to install huge optical cables under the special conditions such as big span and high fall.
CONDITIONS FOR THE USAGE
Special situations such as rivers with greater span, valleys with higher fall, and the situations which is not constrained by conditions such as the line angle.
INTENSITY
160-300KN can be applied according to users＇requirement.
Description
| Model |
Grip(KN) |
Length of Inner Armor Rods(mm) |
Length of Middie Outer Armor Rods(mm) |
Length of Outer Armor Rods(mm) |
Estimated Weight (KG) |
Color |
| OSNZ-160-* * |
160 |
2400 |
1800 |
1600 |
14.9 |
Yellow |
| OSNZ-210-* * |
210 |
2800 |
2200 |
2000 |
20.9 |
Yellow |
| OSNZ-250-* * |
250 |
3100 |
2400 |
2200 |
27.1 |
Yellow |
| OSNZ-300-* * |
300 |
3200 |
2600 |
2400 |
33.8 |
Yellow |
NOTE**representing the outer diameter of the optical cable (mm).
Other supplier products
|
|
Aluminum Alloy Preformed Armor Rod |
FUNCTIONThe armor rods can protect the optical cable by preventing the vibration damper aluminum clamp from nipping directly onto the OPGW cables t... |
|
|
Preformed Tension Clamp Equipment |
Preformed armor rods forming machine： 1.Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protectio... |
|
|
Preformed Armor Rods |
PROTECTIONArmor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
|
|
Cable Top Ties/Side Ties |
FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
All supplier products
Same products
