METAL FLANGING
Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping.
WHAT IS THE ADVANTAGE OF METAL FLANGING?
It can process precision stamping parts with complex shape and good rigidity.
Improve the production efficiency. Save dies for some deep drawing parts. Reduce the manufacturing cost.
It can replace the deep drawing work of a complex shape workpiece, so flanging is especially suitable for small batch trial production.
Flanging is usually applied at the edge of the stamping part, which can effectively save the material.
WHAT SHOULD BE CONCERNED IN METAL FLAGGING?
Flanging is a stamping method that turns the workpiece with holes punched in advance into vertical flange along the hole edge. The deformation of hole flanging is from the tensile deformation of the material along the tangential direction, and the closer to the edges, the greater the deformation and the flanged area of workpiece gets thinner. Due to that, the hole edge may be cracked if not dealt properly. In order to prevent the cracking, the flanging degree of the inner hole of the workpiece must not be too large. If the flanging height is large, we can process flanging several times instead.
In flanging, the deformation degree is expressed by cofficient "K", which is the ratio of the aperture before flanging to the aperture after flanging. Obviously, the larger the value of K, the smaller the degree of deformation. On contrary, the smaller the value of K, the greater the degree of deformation, and more likely the edge of the flanging hole will be broken. The minimum value of K occurs with the maximum deformation degree which can be achieved without cracking the hole edge.
In order to prevent edge cracking, K shall not be too small and shall be greater than the minimum value introduced above. Experience shows that the minimum value of K is not only related to the type and performance of the material, but also to the relative thickness of the blank, and the shape of the product.
If you need any kinds of metal work fabrication, please contact us, as a professional metalworking factory, Hongkun is willing to offer you high quality products.
Send product request
Other supplier products
 |
CAR SEAT BRACKET | The main function of custom car seat bracketsis to keep the driver in a correct sitting position, provide support for the upper body when turning, ... |
 |
METAL PUNCHING | Metal punching serviceis a key part of Hunkmachining's services, mostly applied to automobile parts. As a metal punching factory, metal punching co... |
 |
METAL WELDING | Metal weldingis a manufacturing process and technology to join metals or other thermoplastic materials such as plastics by heating, high temperatur... |
 |
METAL STAMPING | Stamping is a cold stamping process, which is to cut, bend or shape the material into the finished shape and size in accordance with the mold with ... |
 |
MOWER DRIVE ARM IN MOWER DRAG LINK | It is a mechanical assembly used to control the steering of lawn mower drag link, consisting of drive arm, steering arm, steering knuckle, etc. Mos... |
Same products
 |
Hydraulic Hand Pallet Truck | Seller: 869821 | Hydraulic Hand Pallet Truck A is a manually operated material handling tool designed to lift... |
 |
Diesel Injector Nozzles E374 | Seller: 828487 | Diesel Injector Nozzles E374 Common Rail is now the most common fuel system in diesel vehicles... |
 |
Diesel Injector Nozzles E342 | Seller: 828487 | Diesel Injector Nozzles E342 Common Rail is now the most common fuel system in diesel vehicles. ... |
 |
Diesel Injector Nozzles G3S124 | Seller: 828487 | Diesel Injector Nozzles G3S124 China-Lutong is one of the most important Chinese companies in ... |
 |
Diesel Injector Nozzles G3S112 | Seller: 828487 | Diesel Injector Nozzles G3S112 China-Lutong is one of the most important Chinese companies in ... |
