ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
AHKC-EKA series open-type Hall current sensor is a new generation of current sensor developed by applying the principle of Hall effect. It can measure DC, AC, pulse and various irregular waveform currents under electrical isolation conditions. It is suitable for isolation and conversion of complex signals such as AC, DC, and pulse. Through the principle of Hall effect, the converted signal can be directly collected and accepted by various acquisition devices such as AD, DSP, PLC, and secondary instruments.
Specification of AHKC-EKA Open-Loop Hall Effect DCCurrent Transducer(Split-Core)
Enter |
Description&Value |
Rated Input |
0~±(50-500)A DC or 0~(50~500)A AC |
Rated Output |
±5Vdc/±4Vdc |
Accuracy |
Class 1.0 |
Power Supply |
±15Vdc (allow ±20% fluctuation%) |
Consumption |
≤0.5W |
Zero Offset Voltage |
±20mV |
Offset Voltage Drift |
≤±1.0mV/℃ |
Linearity |
≤0.2%FS |
Response Time |
≤5us |
Bandwidth |
0~20kHz |
Isolation Voltage |
Features of AHKC-EKA Open-loop Hall Effect Transducer (Split-core)
01
Reliable performance: By using high-quality electronic components, the device shows good heat resistance and cold resistance, and is easy to use.
02
Easy to install: It has a good structural design to realize the break connection device, and is easy to install and use.
03
High precision: The precision and sensitivity of the Hall current sensor are very high, which meets the requirements of high-precision measurement.
04
Low power consumption: The working current can be obtained from the existing power supply, only a small amount of power consumption is required, and the normal operation of the power supply will not be affected.
If you want to know more kinds of china power meter, please visit our website.
Send product request
Other supplier products
ACREL AMC16-DETT BASE STATION DC ENERGY METER FOR TELECOM TOWER | ACREL AMC16-DETT BASE STATION DC ENERGY METER FOR TELECOM TOWER AMC16-DETT base station DC energy meter For telecom-tower is mainly designed for b... | |
AGF-AE SERIES PV/SOLAR INVERTER ENERGY METER | AGF-AE Series PV/Solar Inverter Meter, as the key components of anti-backflow detection, adopts high-performance MCU and high-precision metering ch... | |
ACREL AM5SE MIDDLE VOLTAGE SWITCHGEAR PROTECTION RELAY | ACREL AM5SE MIDDLE VOLTAGE SWITCHGEAR PROTECTION RELAY This Switched Ground Relay provides accurate and efficient protection for your switchgear s... | |
ACREL AHKC-EKB (200-1000A)/5V OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) | ACREL AHKC-EKB (200-1000A)/5V OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) AHKC-EKB hall split core current sensorcan collect main incoming line ... | |
ACREL AKH-0.66/K-Φ 333MV SPLIT CURRENT TRANSFORMER | ACREL AKH-0.66/K-Φ 333MV SPLIT CURRENT TRANSFORMER Acrel's Split Type Current Transformer, also known as Split Core Current Sensor, is availab... |
Same products
Hall Sensors | Seller: Acrel Co.,Ltd. | Hall Sensors Hall sensor is suitable for uninterruptible power supply (UPS), switching power s... | |
ADL3000-E | Seller: Acrel Co.,Ltd. | ADL 3000-E Acrel ADL 3000-E three-phase din rail multifunction 0.5s KWh energy meter with RS485.... | |
ADL200 | Seller: Acrel Co.,Ltd. | ADL200 ADL200 single phase electric meter is designed for single phase active energy measurement... | |
ADL10-E | Seller: Acrel Co.,Ltd. | ADL10-E ADL Series Energy Management Din Rail Kwh Meter. Acrel strictly controls and manages a... | |
Split Core Current Transformer | Seller: Acrel Co.,Ltd. | Split Core Current Transformer The appearance is nice and the installation and wiring are conv... |