.

ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)

ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)

AHKC-EKA series open-type Hall current sensor is a new generation of current sensor developed by applying the principle of Hall effect. It can measure DC, AC, pulse and various irregular waveform currents under electrical isolation conditions. It is suitable for isolation and conversion of complex signals such as AC, DC, and pulse. Through the principle of Hall effect, the converted signal can be directly collected and accepted by various acquisition devices such as AD, DSP, PLC, and secondary instruments.

Specification of AHKC-EKA Open-Loop Hall Effect DCCurrent Transducer(Split-Core)

Enter

Description&Value

Rated Input

0~±(50-500)A DC or 0~(50~500)A AC

Rated Output

±5Vdc/±4Vdc

Accuracy

Class 1.0

Power Supply

±15Vdc (allow ±20% fluctuation%)

Consumption

≤0.5W

Zero Offset Voltage

±20mV

Offset Voltage Drift

≤±1.0mV/℃

Linearity

≤0.2%FS

Response Time

≤5us

Bandwidth

0~20kHz

Isolation Voltage

Features of AHKC-EKA Open-loop Hall Effect Transducer (Split-core)

01

Reliable performance: By using high-quality electronic components, the device shows good heat resistance and cold resistance, and is easy to use.

02

Easy to install: It has a good structural design to realize the break connection device, and is easy to install and use.

03

High precision: The precision and sensitivity of the Hall current sensor are very high, which meets the requirements of high-precision measurement.

04

Low power consumption: The working current can be obtained from the existing power supply, only a small amount of power consumption is required, and the normal operation of the power supply will not be affected.

If you want to know more kinds of china power meter, please visit our website.



在线联系供应商

至: Jiangsu Acrel Micro-grid Research&Development Institute
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

ACREL AKH-0.66/K SPLIT CORE CURRENT TRANSFORMER FOR BUSBAR
ACREL AKH-0.66/K SPLIT CORE CURRENT TRANSFORMER FOR BUSBAR ACREL AKH-0.66/K SPLIT CORE CURRENT TRANSFORMER FOR BUSBAR Designed as a split core dc current transducer, Acrel's AKH-0.66/K Split Core DC Curren...
ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE)
ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) AHKC-EKA series open-type Hall current sensor is a new generation of current sensor d...
ACREL AM3SE 3 PHASE MV SWITCHGEAR CURRENT VOLTAGE PROTECTION RELAY
ACREL AM3SE 3 PHASE MV SWITCHGEAR CURRENT VOLTAGE PROTECTION RELAY ACREL AM3SE 3 PHASE MV SWITCHGEAR CURRENT VOLTAGE PROTECTION RELAY AM3SE 3 phase under current relayincludes power supply module, CPU module, inpu...
ACREL AMC48-AI AC SINGLE PHASE CURRENT METER
ACREL AMC48-AI AC SINGLE PHASE CURRENT METER ACREL AMC48-AI AC SINGLE PHASE CURRENT METER Acrel's AMC48-AI AC single phase current meteris a digital energy meter with RS485 communication capa...
AHKC SERIES HALL EFFECT SENSOR
AHKC SERIES HALL EFFECT SENSOR The differential hall effectsensor is made according to the principle of the Hall effect, and the Ampere's law is applied at the same time,that i...
供应产品

Same products

Hall Sensors
Hall Sensors 卖方: Acrel Co.,Ltd. Hall Sensors Hall sensor is suitable for uninterruptible power supply (UPS), switching power s...
ADL3000-E
ADL3000-E 卖方: Acrel Co.,Ltd. ADL 3000-E Acrel ADL 3000-E three-phase din rail multifunction 0.5s KWh energy meter with RS485....
ADL200
ADL200 卖方: Acrel Co.,Ltd. ADL200 ADL200 single phase electric meter is designed for single phase active energy measurement...
ADL10-E
ADL10-E 卖方: Acrel Co.,Ltd. ADL10-E ADL Series Energy Management Din Rail Kwh Meter. Acrel strictly controls and manages a...
Split Core Current Transformer
Split Core Current Transformer 卖方: Acrel Co.,Ltd. Split Core Current Transformer The appearance is nice and the installation and wiring are conv...