200Hz /10kvA intermediate frequency generating set
200Hz /10kvA intermediate frequency generating set
Structure:
- One set of 4 KW asynchronous motor (3 phase,50Hz,380V,speed 1430 -1440r/min)
- One set of 10kvA Synchro generator is an intermediate frequency wide voltage separately excited generator. (125Hz,3phase,20- 240V, power factor:0.3)
- One set of control cabinet with voltage regulator
- One set of connection parts. (such as chassis,coupling and so on).
Main technical data and operationg condition:
- Generally, the main body of a M+G set will be fixed on a steel frame chassis .
- Speed range of asynchronous motor : 1430-1440rpm when 4 grade running.
- Synchro generator is a 10 pole intermediate frequency wide voltage separately excited generator.(when the power supply frequency is 50Hz)
- Generator excitationis separately excited way：It can stabilivolt running under given voltage condition. (scorp: voltage is 20 - 240 under 125Hz and Continuous adjusted setting).
- Rated output power: (125Hz): 3 phase, 10kvA , 20-240V, power factor 0.3 (hysteresis).
- Power factor: 0.4 (hysteresis)
- Class of insulation: B
- Class of Protection :IP44
- Installation type: IMB3
- Cooling : IC01
Operating conditions:
- Atmospheric pressure: 100kPa
- Ambient temperature:40℃
- RH: less than90% (20℃)
- Altitude:≤1000m
Mode of operation:
Periodicity running (3 phase full loador 2 phase 6kvAfull loading 1 hour, no loading 1 hour), continuous running:at least4 hours.
- Wave form distortion rate:≤5% (no load line voltage).
- setting range of output voltage: when125Hz, 20–240V Continuous adjusting(stabilivolt running under given voltage condition).
- Noise：≤108dB(A)(Voice level)
The CT, VT Test we can supplied , including CT, VT Routine Test, CT, VT Accuracy , Error Measurement Test, we have rich experience and perfect after-sale service. If you are interested in , you can call us at any time.
Send product request
Other supplier products
|
|
200Hz /10kvA intermediate frequency generating set | 200Hz /10kvA intermediate frequency generating set Structure: One set of 4 KW asynchronous motor (3 phase,50Hz,380V,speed 1430 -1440r/min) One se... |
 |
impulse Current test system | impulse Current test system Impulse Current Test Systems are manufactured for testing equipment applied in medium and high voltage transmission &am... |
 |
Shuttle kiln for ceramic products | Shuttle kiln for ceramic products Brief introduction of shuttle kiln: shuttle kilnandtunnelkilnare important sintering equipment in ceramic and pro... |
 |
SF6 reference Capacitor - 400kV 50pF compressed gas standard capacitor | Genneal Information: Compressed air standard capacitor is a necessary instrument in every HV test lab. It is used to measure the capacitance of cap... |
 |
Shielding hall of HV PD test | Shielding hall of HV PD test Application: HV test shielding room (faraday cage) areWidely used in power cable, transformer, transformer switch, tra... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
