12V 120V ETL APPROVED 2000W INVERTER CHARGER
The CosuperGMC2000 pro-line inverter mobile chargeris the latest model well developed and designed for the ever-growing demands of mobile power systems. It combines battery inverter and AC charger in one unit, which is perfect for applications, like recreational vehicles, special purpose vehicles and boats. Its excellent heavy-load capability allows to run most motors tools, home and office appliances (e.g. vacuum, fans, lights, TV, refrigerator, microwave, coffee machine, toaster, printers, monitors, computers, etc).
In addition to high efficiency, high surge resistance, multi-stage charging, and automatic transfer function between AC and DC systems, it also supports CAN-BUS communication, making it able to meet various monitoring and interactive control needs.
FEATURES OF 12V 120V ETL APPROVED 2000W AN INVERTERCHARGER
Approved by ETL standard
CAN-BUS+RS485 communication
Low THD ensure sensitive loads working stably
Provide CR80 RV control center, PTM-12 remote controller and CR70 Enginnering Mode Panel (optional)
Extra charging function for starter battery
Keep working continuously with full power output at -10~50℃
Battery temperature compensation charging design in cold and warm conditions, helps prolong the battery life.
Ultra-low idle consumption could effectively save the energy
Auto GEN start/stop
Electronic protection against Over/under voltage, overload, overheating, short circuit
2 years warranty
TECHNICAL SPECIFICATIONS OF 12V 120V ETL APPROVED 2000W INVERTER CHARGER
|
Models |
GMC2000 |
|
Rated Power(-10-50℃) |
2000W |
|
DC Input |
|
|
Rated Voltage |
12VDC (10.5~15.5VDC) |
|
75A-house battery ; 3A-start battery |
|
|
Battery Type |
AGM/Gel/Flooded/Lithium |
|
AC Input |
|
|
Output Voltage |
170-275VAC/93.5-126.5VAC |
|
Input Frequency |
45~65Hz |
|
AC Output |
|
|
Output Voltage |
230VAC±5%/120VAC±3% |
|
Oput Frequency |
50/60Hz±1% |
|
Wave Form |
Pure Sine Wave |
|
Transfer Time |
≤6ms |
|
Efficiency |
>90% |
|
Overload |
105-120% 10s/ >120% 3s/ >150% 1s |
|
2400W |
|
|
Protection |
DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
|
Self-consumption |
10W |
|
Protection |
|
|
DC Low-volt Alarm/Shutdown |
|
|
AC Low-volt Switch to DC |
|
|
Bypass To Invertering |
|
|
Battery Over-charge Shutdown |
|
|
General |
|
|
Working Temperature |
-10~50℃ |
|
Storage Temperature |
-20~50℃ |
|
Work/ Storage Humidity |
0-90% No condensation |
|
Dimension (W*D*H) |
500*259*190mm |
Send product request
Other supplier products
 |
48VDC 120V/240VAC 6000W SPLIT PHASE INVERTER CHARGER | The Cosuper DPT6000 Split Phase Inverter Charger is capable of producing 120V/240V AC power. This heavy-duty inverter charger is Specifically desig... |
 |
12V 220V 1500W INVERTER CHARGER | The cosuper CMT1500 pure sine wave inverter plantcharger is a stable power source with 1500W continuous power output and its low harmonic distortio... |
 |
3000W POWER INVERTER | The Cosuper dc to ac converter 3000 wattmakes it possible to plug in almost anywhere and get the (110V/120V/230V/240V)AC power you need just like a... |
 |
MARINE BATTERY CHARGER POWER INVERTER | When exploring a new route or finding the perfect anchor, make sure your electronics have self-sufficient power so you can stay on the water longer... |
 |
2000W INVERTER CHARGER WITH TRANSFER SWITCH | The Cosuper2000 watt pure sine inverter charger with transfer switchcan be used for multiple applications when going off-grid, such as RVs, Caravan... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
