12V 120V ETL APPROVED 2000W INVERTER CHARGER
The CosuperGMC2000 pro-line inverter mobile chargeris the latest model well developed and designed for the ever-growing demands of mobile power systems. It combines battery inverter and AC charger in one unit, which is perfect for applications, like recreational vehicles, special purpose vehicles and boats. Its excellent heavy-load capability allows to run most motors tools, home and office appliances (e.g. vacuum, fans, lights, TV, refrigerator, microwave, coffee machine, toaster, printers, monitors, computers, etc).
In addition to high efficiency, high surge resistance, multi-stage charging, and automatic transfer function between AC and DC systems, it also supports CAN-BUS communication, making it able to meet various monitoring and interactive control needs.
FEATURES OF 12V 120V ETL APPROVED 2000W AN INVERTERCHARGER
Approved by ETL standard
CAN-BUS+RS485 communication
Low THD ensure sensitive loads working stably
Provide CR80 RV control center, PTM-12 remote controller and CR70 Enginnering Mode Panel (optional)
Extra charging function for starter battery
Keep working continuously with full power output at -10~50℃
Battery temperature compensation charging design in cold and warm conditions, helps prolong the battery life.
Ultra-low idle consumption could effectively save the energy
Auto GEN start/stop
Electronic protection against Over/under voltage, overload, overheating, short circuit
2 years warranty
TECHNICAL SPECIFICATIONS OF 12V 120V ETL APPROVED 2000W INVERTER CHARGER
|
Models |
GMC2000 |
|
Rated Power(-10-50℃) |
2000W |
|
DC Input |
|
|
Rated Voltage |
12VDC (10.5~15.5VDC) |
|
75A-house battery ; 3A-start battery |
|
|
Battery Type |
AGM/Gel/Flooded/Lithium |
|
AC Input |
|
|
Output Voltage |
170-275VAC/93.5-126.5VAC |
|
Input Frequency |
45~65Hz |
|
AC Output |
|
|
Output Voltage |
230VAC±5%/120VAC±3% |
|
Oput Frequency |
50/60Hz±1% |
|
Wave Form |
Pure Sine Wave |
|
Transfer Time |
≤6ms |
|
Efficiency |
>90% |
|
Overload |
105-120% 10s/ >120% 3s/ >150% 1s |
|
2400W |
|
|
Protection |
DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
|
Self-consumption |
10W |
|
Protection |
|
|
DC Low-volt Alarm/Shutdown |
|
|
AC Low-volt Switch to DC |
|
|
Bypass To Invertering |
|
|
Battery Over-charge Shutdown |
|
|
General |
|
|
Working Temperature |
-10~50℃ |
|
Storage Temperature |
-20~50℃ |
|
Work/ Storage Humidity |
0-90% No condensation |
|
Dimension (W*D*H) |
500*259*190mm |
在线联系供应商
Other supplier products
 |
4000W PURE SINE WAVE INVERTER CHARGER | The Cosuper CPT4000 watt pure sine inverter chargeris a 3-in-1 power solution system that combines an inverter, battery charger and AC automatic tr... |
 |
8000W AUTOMATIC INVERTER CHARGER | When you are going off-grid to a campsite, outdoor camping trip or on a boat, it is always a good idea to have a power source that can help power a... |
 |
12V 120V ETL APPROVED 3000W INVERTER CHARGER | The Cosuper GMC3000 pro-line pure sine wave inverter charger is a perfect power solution with combination of battery inverter, battery charger and ... |
 |
2000W MODIFIED SINE WAVE POWER INVERTER | The Cosuper DPI2000 is a 2000W modified sine wave inverterwith low interference and high efficiency. This unit converts 12/24V DC to 120V/230V AC a... |
 |
3000W RACK MOUNT INVERTER CHARGER | The Cosuper PPL3000 rack mount inverter 48vis ideal for providing backup power to your essential equipment such as telecom, audio and computers. It... |
Same products
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: 深圳市福好运科技有限公司 | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... |
