POE Surge Protector (Gigabit)

Power over Ethernet protector is designed for POEpower surgesupply equipment, are widely used in the areas of wireless coverage, security monitoring, etc. to protect the communication equipment's SPD POE port line from the impact of lightning Electromagnetic pulse, lightning electromagnetic pulse, switching overvoltage.

Features of SPD for Ethernet Power System POE6-48 POE6-48-24

Dual protection in Common module and different module

TVS array technology, low capacitance

Multi-Strike Capability

Application Of SPD Chinafor Ethernet Power System POE6-48 POE6-48-24

POE6-48 POE6-48-24 is designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.

CAT6, CAT5e, and CAT5 compatible

10/100/1000 Base-T Gigabit Ethernet protection

LAN, FDDI, CDDI, ATM, WLAN

PDH, SDH, SPDH

Industrial control

Technical Parameters of Ethernet Surge Protector POE6-48 POE6-48-24

Model	POE6-48	POE6-48-4	POE6-48-8		POE6-48-24
Lightning projection zone(LPZ)	2
Standards Compliance	IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002
According to IEC61643	III
According to DIN VDE6075 Part6 (Draft 11.89) A1, A2	D
Max continuous operating voltage Uc	68VDC
Nominal working voltage(Un)	48VDC
Nominal discharge current (8/20µs) In	3KA
Max discharge current Imax (8/21µs) Imax	5KA
Voltage protection Level @C2(8/20µs) Up	≤190V(L-L)≤500V(L-G)
Voltage protection Level @C3(1kV/µs) Up	≤145V(L-L)≤600V(L-G)
Rated load current IL	200mA
Limiting Voltage (10/700µs)	≤20V
Cut-off Frequency fG	250MHz
Response time tA (L-N/N-PE)	1ns
Protection line	1/2, 3/6, 4/5, 7/8
Mounting	Be Installed between protected equipment and signal line
Adapt Transmission rate	1000Mbps
Transmission standards	100BaseT/ 1000BaseT/1000Base TX, CAT5/CAT6, POE
Dimension	104H)×58(W)×28(L)mm	95 (H)×85(W)×48(L)mm		190 (H)×85(W)×48(L)mm		482 (H)×86(W)×44(L)mm
Interface form	RJ45
IP code(IEC EN 60529)	IP20
Error rate	≤10-12
Material/color	Aluminum/Blue
Insertion loss	≤0.1dB
Working conditions	Temperature: -40 to 85℃, Relative humidity: ≤95％

If you want to know more kinds of poe lightning arrester and ethernet arrester, please visit our website.

As one of lightning protection companies, we will do our best to meet all the needs of customers.

Other supplier products

	2 In 1 SPD for CCTV M10-12 D12Y2	2 in 1 monitor lightning arrester(power and control), a Kind of SPD, designed for analog video/ digital camera to protect camera power, control lin...
	DIN-rail mounted DC power Surge protective device(SPD)	DC power supply SPD, also called DC lightning arrestor or DC surge suppressor, is designed for the protection of DC power circuit from the damage o...
	Video Lightning protector for analog camera CCTV system	Video signal protector is designed for analog video/digital camera to protect electrical and electronic equipment's signal line from the impact of ...
	Smart Lightning Protective Devices	The smart spike guard, Techwin intelligent surge protector(SPD), adopts the technology of Internet of things big data, integrate lightning protecti...
	Din-rail DC Power SPD For PV Solar Power System	DC module for PV solar power system is mainly used to protect DC power system and electric and electronic equipment from lightning over-voltage and...

All supplier products

Same products

	CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS	Seller: ZK Electronic Technology Co., Limited	Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
	CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF	Seller: ZK Electronic Technology Co., Limited	Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
	Heavy Copper PCB Manufacturer	Seller: Xinfeng Huihe Circuits Co., Ltd.	Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
	8 Layer ENIG Half Hole Custom PCB	Seller: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
	4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board	Seller: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...