POE Surge Protector (Gigabit)
Power over Ethernet protector is designed for POEpower surgesupply equipment, are widely used in the areas of wireless coverage, security monitoring, etc. to protect the communication equipment's SPD POE port line from the impact of lightning Electromagnetic pulse, lightning electromagnetic pulse, switching overvoltage.
Features of SPD for Ethernet Power System POE6-48 POE6-48-24
Dual protection in Common module and different module
TVS array technology, low capacitance
Multi-Strike Capability
Application Of SPD Chinafor Ethernet Power System POE6-48 POE6-48-24
POE6-48 POE6-48-24 is designed for Ethernet device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.
CAT6, CAT5e, and CAT5 compatible
10/100/1000 Base-T Gigabit Ethernet protection
LAN, FDDI, CDDI, ATM, WLAN
PDH, SDH, SPDH
Industrial control
Technical Parameters of Ethernet Surge Protector POE6-48 POE6-48-24
Model |
POE6-48 |
POE6-48-4 |
POE6-48-8 |
POE6-48-24 |
||
Lightning projection zone(LPZ) |
2 |
|||||
Standards Compliance |
IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002 |
|||||
According to IEC61643 |
III |
|||||
According to DIN VDE6075 Part6 (Draft 11.89) A1, A2 |
D |
|||||
Max continuous operating voltage Uc |
68VDC |
|||||
Nominal working voltage(Un) |
48VDC |
|||||
Nominal discharge current (8/20µs) In |
3KA |
|||||
Max discharge current Imax (8/21µs) Imax |
5KA |
|||||
Voltage protection Level @C2(8/20µs) Up |
≤190V(L-L)≤500V(L-G) |
|||||
Voltage protection Level @C3(1kV/µs) Up |
≤145V(L-L)≤600V(L-G) |
|||||
Rated load current IL |
200mA |
|||||
Limiting Voltage (10/700µs) |
≤20V |
|||||
Cut-off Frequency fG |
250MHz |
|||||
Response time tA (L-N/N-PE) |
1ns |
|||||
Protection line |
1/2, 3/6, 4/5, 7/8 |
|||||
Mounting |
Be Installed between protected equipment and signal line |
|||||
Adapt Transmission rate |
1000Mbps |
|||||
Transmission standards |
100BaseT/ 1000BaseT/1000Base TX, CAT5/CAT6, POE |
|||||
Dimension |
104H)×58(W)×28(L)mm |
95 (H)×85(W)×48(L)mm |
190 (H)×85(W)×48(L)mm |
482 (H)×86(W)×44(L)mm |
||
Interface form |
RJ45 |
|||||
IP code(IEC EN 60529) |
IP20 |
|||||
Error rate |
≤10-12 |
|||||
Material/color |
Aluminum/Blue |
|||||
Insertion loss |
≤0.1dB |
|||||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
If you want to know more kinds of poe lightning arrester and ethernet arrester, please visit our website.
As one of lightning protection companies, we will do our best to meet all the needs of customers.
在线联系供应商
Other supplier products
Smart Lightning Protective Devices | The smart spike guard, Techwin intelligent surge protector(SPD), adopts the technology of Internet of things big data, integrate lightning protecti... | |
SPD for Audio Surge Protector | With a standard RJ11/45 interface, the audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs o... | |
2 in 1 SPD for CCTV | 2 in 1 monitor cctv lightning surge protectors(power and network/ power and video/ power and control), is designed for a digital camera to protect ... | |
SPD for Solar Power System/PV System | Lightning combiner box for PV array is installed between PV module and inverter. And solar power surge protectorpowersystem is widely applied in a ... | |
SPD for AC Power Supply | SPD for AC Power Supply is mainly applicable to the power distribution systems for Class I / II / III( spd class 1 2 3) protection. Surge arresters... |
Same products
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... | |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... | |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... | |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... | |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |