Ultrasonic Surgical System
Anmei, one of the professional plastic master batch manufacturers, has a range of customized masterbatches available which incorporate Anti-mold Masterbatch, for use in different polymers and applications. It is to prevent unbearable odors and unsightly staining.
The Development Process of Anti-Mold Masterbatch
The antistatic masterbatchdevelopment process begins with your end-used products. We select the proper resin, colorants, additives, modifiers and fillers to meet your performance and test requirements. Once the properties are approved by your, samples may be produced for pre-production trials.
Benefits of conductive masterbatch
Moldy plastics emit an unpleasant smell and make them undesirable or unusable due to the decreasing of the aesthetics of the product surface. When an anti-mold masterbatch was used, it can inhibit mold growth and prevent odors and stains. It includes as its primary function the removal of micro-bacteriological charges and above all the removal of mold and fungi. The working principle of anti-mold masterbatch is different from that of antimicrobial masterbatch. Just the right anti-mold masterbatch based on your end-use areas can reach a certain level of effect.
Application of antiblock masterbatch
Anti-mold masterbatch applications can be numerous and can be applied to ABS, PA, PP, PE, and other polymers and manufactured in an injection molding, extrusion, and blown film. The strong protective effect of this antiblock masterbatch is suitable for use in the sector of water box of floor scrubber.
Want to buy masterbatch, contact us.
There are many masterbatch suppliers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Anmei-Polyamide Nylon 66 (PA66) for Engineering Plastics | Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original... |
 |
Nylon66 PA66 Halogen-free FR (A2005X01) for Engineering Plastics | Nylon66 PA66FRHalogen-free FR (A2005X01) for Engineering Plastics Flame-retardant PA66 is a halogen-free flame retardant engineering plastic made ... |
 |
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics | PA66GF15is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei GroupPA66 GF15 With Hi... |
 |
PA66 GF35 (A2000G, A2011G, A2111G) | PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa 6.6 gf 35, that is, 35% glass fiber is added to nylon 66. Typi... |
 |
Engineering Plastic Application for Different Industries | Engineering Plastic Applicationfor Different Industries Anmei, one of the most experienced engineering plastic andmasterbatch producers, offers ... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
