Special Gas Compressor
Based on the low compression temperature characteristics of the water-lubricated air end and the natural advantages of corrosion resistance of the stainless steel air end, CMN has developed various pure oil-free special process gas compressor, including hydrogen compressors, coal bed methane compressors, Carbon dioxide compressors, biogas compressors, natural gas compressors, etc. are widely used in the exhaust gas recovery process in the petroleum and petrochemical industry, and are safe, energy-saving and efficient.
WHAT CAN YOU DO WITH CMN SPECIAL GAS COMPRESSOR
The special process compressoris an explosion-proof and anti-corrosion gas source equipment among the special gas source technology products. The product uses special material components and is equipped with explosion-proof motors, explosion-proof electronic controls, explosion-proof sensing and control components. Process gas compressor is a special process product manufactured and tested in strict compliance with the standards of the military nuclear power quality assurance system.
Special gas explosion-proof compressors are mainly used in biogas, nitrogen, methane, propane, natural gas, ammonia, argon, liquefied gas, petroleum associated gas, ethylene, propylene, ethyl chloride, ethylene oxide, ethylidene fluoride, and carbon monoxide , carbon dioxide and other toxic and harmful media industries
WHY DO YOU CHOOSE CMN SPECIAL GAS COMPRESSOR？
The entire series of CMN special gas compressors has obtained explosion-proof certification. Compared with traditional piston compressors, the water-injection screw air end has incomparable advantages in compressing flammable and explosive gases, including: the water injected screw air end has low temperature , usually does not exceed 45 degrees Celsius, while the compression cavity temperature of the piston compressor is above 100 degrees during operation, which poses certain safety risks. At the same time, isothermal compression makes the water-injection screw host more efficient and consumes less energy.
For more information about process gas compressor workingand oil free screw compressor pdf, please feel free to contact us!
在线联系供应商
Other supplier products
 |
REFRIGERATED AIR DRYER FOR AIR COMPRESSOR | The characteristics determined by the partial pressure of water vapor in compressed air and the temperature of compressed air are used for cooling,... |
 |
Oil Free Air Compressor | The entire series of CMN oil free compressor in chinaare certified by German TUV Rheinland for oil-free, in cordinate with level of Class 0. Unlike... |
|
|
Special Gas Compressor | Based on the low compression temperature characteristics of the water-lubricated air end and the natural advantages of corrosion resistance of the ... |
 |
OILLESS SCROLL TYPE AIR COMPRESSOR | CMN scroll style compressorhas an air supply pressure of 2 to 12 bar, a gas production volume of 255 to 1660L/min, and an ultra-quiet design. CMN o... |
 |
NO OIL WATER INJECTED SCREW AIR COMPRESSOR | Pure water instead of lubricating oil is used in air end for lubrication. Air end and all parts contacting with water are made of 304 food grade st... |
Same products
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole Fr4 PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/3.5mil Inner l... |
 |
2 Layer OSP Impedance Control Half Hole PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness:... |
