ADSS Fiber Optic Cable
Introduction of ADSS Fiber Optical Cable
ADSS cable, All-dielectric Self-supporting Optical Cable (also known as All-dielectric self-supporting fiber optic cable). All-dielectric fiber optic cable is made of all-dielectric materials. Self-supporting means that the reinforcing member of the optical cable itself can withstand its own weight and external load. Because of its self-supporting , its mechanical strength is very important.
The use of all-dielectric materials is due to the fact that the cable is in a high-voltage, high-energy environment and must withstand the effects of high voltage. Since it is used overhead on the power pole tower, it must have a matching pendant to fix the cable to the tower. That is, the ADSS fiber cablehas three key technologies: the mechanical design of the cable, the determination of the suspension point, and the selection and installation of the matching hardware.
The mechanical properties of ADSS fiber optic cable are mainly reflected in the maximum operating tension, average running tension and ultimate tensile strength of the cable. The national standard for ordinary optical cables specifies the mechanical strength that optical cables with different modes of use (such as overhead, pipelines, direct burial, etc.) should have. The ADSS cable is a self-supporting overhead cable, so it must withstand the long-term effects of its own gravity and must withstand the baptism of the natural environment. If the mechanical performance of the ADSS cable is not designed properly and is not compatible with the local weather, the cable will have a safety hazard and the life will be compromised. Therefore, each ADSS cable project must be designed with professional software according to the natural environment and span of the cable routing to ensure that the cable has sufficient mechanical strength. When the transmission line is already equipped with a ground wire and the remaining life is still quite long, it is necessary to build the optical cable system with low installation cost as soon as possible, and avoid the power outage operation, etc., the ADSS cable has great advantages.
ADSS cable jacket
ADSS cables use different jackets for different power routes. The most common ADSS jackets are available in two types: PE jacket and AT jacket. PE sheath is ordinary polyethylene sheath and used for power lines below 110KV. AT sheath is anti-tracking sheath and used for power lines above 100KV.
The characteristics of the ADSS cable are as follows
(1) Designed specifically for power systems, it is a self-supporting overhead cable with full- dielectric and its structure does not contain any metal materials;
(2) Fully-dielectric structure and high withstand voltage index are conducive to racking workers on overhead power lines with live operation, without affecting line operation;
(3) The anti-strand material with high tensile strength can withstand strong tension, meet the requirements of large span of overhead power lines, and prevent cockroaches and artificial shots;
(4) The thermal expansion coefficient of the ADSS cable is small. When the temperature changes greatly, the arc of the cable has little change, and its weight is light, and the load of ice and wind is small.
If you want to know more details of the ADSS fiber optic cable price, just feel free to contact us!
图片链接：
Send product request
Other supplier products
 |
Indoor Flat Ribbon Fiber Optic Cable GJDFJV 12 Colorful Fibers 4 8 Cores SM MM LSZH | UnitekFiber supplies GJDFJV Flat Ribbon Fiber cable. The structure of Ribbon Fibercable is a paralleled 12 colorful fibers(also can be 4 fiber or 8... |
 |
Outdoor Waterproof Armored Fiber Patch Cable PDLC to DLC for RRU BBU ZTE | Description: UnitekFiber produces Outdoor Armored PDLC Waterproof Assemblies. The cable is used for outdoor RRU transmitting optical signal and rem... |
 |
FTTH Terminal Box | The FTTH distribution terminal boxis made of ABS material and is a box for protecting optical fiber cable and pigtail welding at the termination of... |
 |
FTTH Drop Fiber Optic Cable | Introduction of ftth indoor drop cable We are specialized manufacturer in China supply high-quality products of FTTH Drop Fiber Optic Cable, Flat ... |
 |
Aerial Fiber Optic Cable | Description of Aerial Fiber Optic Cable Aerial fiber optic cable is typically used when installing outside the pole. It is a fiber optic cable. Bec... |
Same products
 |
ROD CORE INDUCTOR | Seller: Yu Yang Magnetic Co., LTD | High saturation current. General purpose inductors Low cost design Tin plated leads. Varnish ... |
 |
KYN28-12 Metal-clad indoor movable switchgear | Seller: Jiangsu Aokai Electric Co., Ltd | KYN28-12 indoor communication metal armoured open switchgear(hereinatter referred to as the switc... |
 |
MTUB43-90511B-12A20 Mini USB Female Connector | Seller: MTCONN ELECTRONICS CO.,LTD | This model is a Mini USB R/A T/H DIP female connectorthat complied with RoHS certificate. It adop... |
 |
Radar RD03 | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | The RD03 low-altitude surveillance radaris a Ku-band phased array radar that adopts an all-solid-... |
 |
IWRFSOC8X8 Xilinx RFSoC 3U 4-Channel/ DC-4GHz | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | InterWiser IWRFSOC8x8 3U algorithm evaluation modular systemdesigned for integration into deploye... |
