ADSS Fiber Optic Cable
Introduction of ADSS Fiber Optical Cable
ADSS cable, All-dielectric Self-supporting Optical Cable (also known as All-dielectric self-supporting fiber optic cable). All-dielectric fiber optic cable is made of all-dielectric materials. Self-supporting means that the reinforcing member of the optical cable itself can withstand its own weight and external load. Because of its self-supporting , its mechanical strength is very important.
The use of all-dielectric materials is due to the fact that the cable is in a high-voltage, high-energy environment and must withstand the effects of high voltage. Since it is used overhead on the power pole tower, it must have a matching pendant to fix the cable to the tower. That is, the ADSS fiber cablehas three key technologies: the mechanical design of the cable, the determination of the suspension point, and the selection and installation of the matching hardware.
The mechanical properties of ADSS fiber optic cable are mainly reflected in the maximum operating tension, average running tension and ultimate tensile strength of the cable. The national standard for ordinary optical cables specifies the mechanical strength that optical cables with different modes of use (such as overhead, pipelines, direct burial, etc.) should have. The ADSS cable is a self-supporting overhead cable, so it must withstand the long-term effects of its own gravity and must withstand the baptism of the natural environment. If the mechanical performance of the ADSS cable is not designed properly and is not compatible with the local weather, the cable will have a safety hazard and the life will be compromised. Therefore, each ADSS cable project must be designed with professional software according to the natural environment and span of the cable routing to ensure that the cable has sufficient mechanical strength. When the transmission line is already equipped with a ground wire and the remaining life is still quite long, it is necessary to build the optical cable system with low installation cost as soon as possible, and avoid the power outage operation, etc., the ADSS cable has great advantages.
ADSS cable jacket
ADSS cables use different jackets for different power routes. The most common ADSS jackets are available in two types: PE jacket and AT jacket. PE sheath is ordinary polyethylene sheath and used for power lines below 110KV. AT sheath is anti-tracking sheath and used for power lines above 100KV.
The characteristics of the ADSS cable are as follows
(1) Designed specifically for power systems, it is a self-supporting overhead cable with full- dielectric and its structure does not contain any metal materials;
(2) Fully-dielectric structure and high withstand voltage index are conducive to racking workers on overhead power lines with live operation, without affecting line operation;
(3) The anti-strand material with high tensile strength can withstand strong tension, meet the requirements of large span of overhead power lines, and prevent cockroaches and artificial shots;
(4) The thermal expansion coefficient of the ADSS cable is small. When the temperature changes greatly, the arc of the cable has little change, and its weight is light, and the load of ice and wind is small.
If you want to know more details of the ADSS fiber optic cable price, just feel free to contact us!
图片链接：
在线联系供应商
Other supplier products
 |
1 Pair 10/100M Media Converter Fiber to RJ45 Media Converter Single Mode 20km | Description10 / 100Mbps single-mode single-fiber media converter is an Ethernet optoelectronic signal conversion device between 10 / 100M UTP inter... |
 |
288 Fibers Rack Mount Optical Distribution Fiber(ODF) Panel Box | Description: UnitekFiber supplies Fiber Optic Distribution Frame or Optical Patch Panel. Our rack mount ODF is in 3U designed and sliding structure... |
 |
Indoor Tight-buffered Fiber Optic Cable GJFJV 12 Colors 0.9mm G.657A1 Corning LSZH|PVC | Tight-buffered 0.9mm gjfjv optical fiber cableis consist of a colored bare fiber and extruded with PVC or LSZH sheath around the bare fiber with va... |
 |
FTTH Drop Fiber Optic Cable | Introduction of ftth indoor drop cable We are specialized manufacturer in China supply high-quality products of FTTH Drop Fiber Optic Cable, Flat ... |
 |
Direct Burry Fiber Optic Cable|GYTA53 Fiber Cable 24 Core SM Aluminum Armored Double Sheathed Loose Tube | GYTA53 direct burial single mode fiber optic cableis with good waterproof, anti-side pressure and tensile properties, suitable for direct burial. ... |
Same products
 |
iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux | 卖方: 深圳市维客修科技有限公司 | Description iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone... |
 |
DWDM Add and Drop Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is OADM? The DWDMmultiplexercard launched by Sintai Communication Co., Ltd is generally use... |
 |
DCM | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is Dispersion Compensation Fiber Dispersion Compensation Module (DCM) is designed to fix th... |
 |
Aggregation & Distribution System | 卖方: Guangzhou Sintai Communication Co.,LTD | Aggregation & Distribution System Sintai Aggregation & Distribution System offers 32*100... |
 |
CWDM Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | 4CH CWDM Mux Demux 01- 4CH CWDM DWDMMux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Mul... |
