.

Breakout Indoor Fiber Optic Cable

Description of breakout indoorfiber optic cable

Breakout fiber optic cable also can be called as distribution fiber optical cable is designed for Indoor uses. There are two types of fiber cable breakout. One is inside with 2.0/3.0mm tight buffered cables. The fiber glass cores of this cable structure commonly can reach 48 cores. The other is inside with 0.9mm tight buffered around with Kevlar yarn as strengthen support.

The cable fiber cores is 4-144 cores. The outer jacket for both type of cable is LSZH or PVC. The tensile strength for former type of fiber cable is much higher. Breakout cable is usually assembled with terminations to be a breakout or fan-out pigtails or path cords.

The distribution bundled pigtail fiber, also known as the tail fiber bundle, has a connector at one end and a broken end of the fiber cable at the other end. It is connected to the core of other fiber optic cables by splicing, and is often installed to connect terminal equipment in the ODF frame box, fiber terminal box. The pigtails are divided into multi-mode pigtails and single-mode pigtails. The multimode pigtail is orange with a wavelength of 850 nm and a transmission distance of 500 m for short-distance interconnection. The single-mode pigtail is yellow with two wavelengths, 1310nm and 1550nm, and the transmission distance is 10km and 40km respectively.

Bundle pigtail classification

Divided into end-to-end branch connections for use in distribution bundle pigtails.

According to the joint mode, it is divided into FC, SC, LC, and ST.

The end faces of the joints can be divided into PC, UPC and APC.

According to the specifications of the optical fiber, it can be divided into: 0.9mm outer sheath with a diameter of 0.9mm; 1.6mm outer sheath with a diameter of 1.6mm; 2.0mm outer sheath with a diameter of 2.0mm.

Bundle pigtail specifications and requirements

The specifications of the bundled pigtails for above picture are: wiring bundle cable for indoor use, metal-free components, 12-core and 8-core, G.652D-type optical fiber, low-smoke halogen-free jacket, connector type FC/UPC, The length is 1.8 meters.



Send product request

To: Shenzhen UnitekFiber Solution Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Aerial Fiber Optic Cable
Aerial Fiber Optic Cable Description of Aerial Fiber Optic Cable Aerial fiber optic cable is typically used when installing outside the pole. It is a fiber optic cable. Be...
Indoor Tight-buffered Fiber Optic Cable GJFJV 12 Colors 0.9mm G.657A1 Corning LSZH|PVC
Indoor Tight-buffered Fiber Optic Cable GJFJV 12 Colors 0.9mm G.657A1 Corning LSZH|PVC Tight-buffered 0.9mm gjfjv optical fiber cableis consist of a colored bare fiber and extruded with PVC or LSZH sheath around the bare fiber with va...
Waterproof Pre-Terminated Fiber Optical Pigtail SC LC Connectors for CATV
Waterproof Pre-Terminated Fiber Optical Pigtail SC LC Connectors for CATV UnitekFiber Waterproof Pre-terminated Fiber Optical pigtail is to connect the optical node to the backbone fiber in CATV system. Its design fits Ae...
Aerial Fiber Optic Cable
Aerial Fiber Optic Cable Description of Aerial Fiber Optic Cable Aerial fiber optic cable is typically used when installing outside the pole. It is a fiber optic cable. Bec...
FTTA Waterproof NSN Fiber Optic Patch Cord Duplex LC with Flexible Boot SM MM
FTTA Waterproof NSN Fiber Optic Patch Cord Duplex LC with Flexible Boot SM MM NSN Fiber Optical patchcords connect with duplex LC connectors and with flexible boots. The cables are easy to operate when using. The bulkhead cut...
All supplier products

Same products

iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux
iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux Seller: Shenzhen Wikshu Technology Co. Description iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone...
DWDM Add and Drop Mux Demux
DWDM Add and Drop Mux Demux Seller: Guangzhou Sintai Communication Co.,LTD What Is OADM? The DWDMmultiplexercard launched by Sintai Communication Co., Ltd is generally use...
DCM
DCM Seller: Guangzhou Sintai Communication Co.,LTD What Is Dispersion Compensation Fiber Dispersion Compensation Module (DCM) is designed to fix th...
Aggregation & Distribution System
Aggregation & Distribution System Seller: Guangzhou Sintai Communication Co.,LTD Aggregation & Distribution System Sintai Aggregation & Distribution System offers 32*100...
CWDM Mux Demux
CWDM Mux Demux Seller: Guangzhou Sintai Communication Co.,LTD 4CH CWDM Mux Demux 01- 4CH CWDM DWDMMux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Mul...