Breakout Indoor Fiber Optic Cable
Description of breakout indoorfiber optic cable
Breakout fiber optic cable also can be called as distribution fiber optical cable is designed for Indoor uses. There are two types of fiber cable breakout. One is inside with 2.0/3.0mm tight buffered cables. The fiber glass cores of this cable structure commonly can reach 48 cores. The other is inside with 0.9mm tight buffered around with Kevlar yarn as strengthen support.
The cable fiber cores is 4-144 cores. The outer jacket for both type of cable is LSZH or PVC. The tensile strength for former type of fiber cable is much higher. Breakout cable is usually assembled with terminations to be a breakout or fan-out pigtails or path cords.
The distribution bundled pigtail fiber, also known as the tail fiber bundle, has a connector at one end and a broken end of the fiber cable at the other end. It is connected to the core of other fiber optic cables by splicing, and is often installed to connect terminal equipment in the ODF frame box, fiber terminal box. The pigtails are divided into multi-mode pigtails and single-mode pigtails. The multimode pigtail is orange with a wavelength of 850 nm and a transmission distance of 500 m for short-distance interconnection. The single-mode pigtail is yellow with two wavelengths, 1310nm and 1550nm, and the transmission distance is 10km and 40km respectively.
Bundle pigtail classification
Divided into end-to-end branch connections for use in distribution bundle pigtails.
According to the joint mode, it is divided into FC, SC, LC, and ST.
The end faces of the joints can be divided into PC, UPC and APC.
According to the specifications of the optical fiber, it can be divided into: 0.9mm outer sheath with a diameter of 0.9mm; 1.6mm outer sheath with a diameter of 1.6mm; 2.0mm outer sheath with a diameter of 2.0mm.
Bundle pigtail specifications and requirements
The specifications of the bundled pigtails for above picture are: wiring bundle cable for indoor use, metal-free components, 12-core and 8-core, G.652D-type optical fiber, low-smoke halogen-free jacket, connector type FC/UPC, The length is 1.8 meters.
在线联系供应商
Other supplier products
MPO/MTP Fiber Cable|MPO-SC Fiber Optical Branch Patch Cord 12 cores 0.9mm SM MM | MPOpatch cable, MPOpatch cordis a 12 fibers 0.9mm cable or a 12 cores breakout fiber cable, one end with a MPO connectorand another end with 12pcs ... | |
1U 48 cores Fiber Optic Patch Panel LC, SC, FC, ST MPO Cassette Patch Panel | Description This Fiber Optical patch panel is a 19-inch standard type. This Patch panel can be equipped with MPO module box and splicing fiber met... | |
Air Blowing Micro fiber Optic Cable | technology is a new way to make significant improvements in traditional fiber optic systems, facilitating the rapid adoption of fiber optic network... | |
Optical PLC Splitter Mini Tube Steel Tube Bare Ribbon Fiber | The bare fiber type PLC optical ribbon fiber splitteris directly used by the optical fiber (usually using a ribbon fiber), and the two ends are not... | |
Duct Fiber Optical Cable | Description of Duct Fiber Cable Duct fiber optic cable includes metallic and dielectric cables, and the number of fibers is 2 up to 288 fibers. ... |
Same products
Warehouse Automation Expert | 卖方: HAI ROBOTICS | Warehouse Expert Intelligent Case-to-person Solution Hai Robotics provides highly efficient Goo... | |
Retail Logistics Solutions | 卖方: HAI ROBOTICS | Logistics Management in Retail Industry As market instability factors continue to increase, comp... | |
Healthcare | 卖方: HAI ROBOTICS | Healthcare Supply Chain Automation Due to aging populations and increased disease rates, medical... | |
Apparel | 卖方: HAI ROBOTICS | As the global fashion industry continues to grow, the supply chain is facing a range of challenge... | |
Electronics | 卖方: HAI ROBOTICS | As consumer demands for personalization and customization continue to rise, production modes are ... |