Magnetic Separator Series
Product features:
1, Poor iron ore by the rough or broken in pieces after the election of the rough, rock, and so excludes waste, improve quality, reduce operation under load
2, For the reduction of Hematite closed roast will be not fully restore health and mine don't returned.
3, For the ceramic industry in the porcelain clay mixed iron removal, improve the quality of ceramic products and then burned.
4, Burning coal, sand casting, refractory materials, as well as additional rows need to iron-removal operation.
Working principle:
After feeding boxes into the tank, the pulp, to flow under the action of sprinkler pipe in mine, particles diffuse into the tank's status to mining areas. In the role of the magnetic field, magnetic particles formed by magnetic polymer "magnetic" or "flux", "magnetic" or "flux" magnetic effect in the pulp, to pole movement, were attracted to the cylinder.Due to pole of polarity along cylinder rotating direction is alternating arranged of, and in work fixed does not dynamic, "magnetic mission" or "magnetic chain" in with cylinder rotating, due to pole alternating and produced magnetic mixing phenomenon, is inclusions in "magnetic mission" or "magnetic chain" in the of gangue, non-magnetic mineral in turned in the off down, eventually is suction in cylinder surface of "magnetic mission" or "magnetic Lotus" that is fine mine.
Application fields:Mineral processing
Materials:Suitable for wet magnetic separation of pyrrhotite, roasting ore, ilmenite, and other materials whose size is below 3mm.
| Model | Diameter of Cylinder (mm) |
Long of Cylinder (mm) |
Cylinder speed (r/min) |
Feeding size (mm) |
capacit (t/h) |
Power (kw) |
| CTB6012 | 600 | 1200 | <35 | 2.0 | 10.20 | 1.5 |
| CTB6018 | 600 | 1800 | <35 | 2.0 | 15-30 | 2.2 |
| CTB7518 | 750 | 1800 | <35 | 2.0 | 20-45 | 2.2 |
| CTB9018 | 900 | 1800 | <35 | 3.0 | 40-60 | 3 |
| CTB9021 | 900 | 2100 | <35 | 3.0 | 45-60 | 3 |
| CTB9024 | 900 | 2400 | <28 | 3.0 | 45-70 | 4 |
| CTB1018 | 1050 | 1800 | <20 | 3.0 | 50-75 | 5.5 |
| CTB1021 | 1050 | 2100 | <20 | 3.0 | 50-100 | 5.5 |
| CTB1024 | 1050 | 2400 | <20 | 3.0 | 60-120 | 5.5 |
| CTB1218 | 1200 | 1800 | <18 | 3.0 | 80-140 | 5.5 |
| CTB1224 | 1200 | 2400 | <18 | 3.0 | 85-180 | 7.5 |
| CTB1230 | 1200 | 3000 | <18 | 3.0 | 100-180 | 7.5 |
| CTB1530 | 1500 | 3000 | <14 | 3.0 | 170-280 | 11 |
Send product request
Other supplier products
 |
High Pressure Grinder Series | Technical Advantage:1. It has low production cost, and high performance.2. Solid structure, small coverage area, strong set, to make a production s... |
 |
Tailing Recycling Machine | Product advantage:1, Arrangement of magnetic field: magnetic pole spacing of disks is small, no magnetic field-free region between the disk and the... |
 |
High-efficiency Concentrator | Product Advantage:1, Add flocculant increased size of solid particles settlement, thus speeding up the settling velocity2, Install tilt plates redu... |
 |
Powder Concentrator | 1.The material in the hierarchical indoor, under the action of double rotor strong cyclone and radial shear force, and the material dispersion is g... |
 |
Flotation Machine | Technical Advantage:This equipment has the following features:1. Breathe in large volume, low power consumption.Each slot with inspiratory, plasma ... |
Same products
 |
4-Shaft Winder Cast Film Machine | Seller: Wenzhou Chaoshun Machinery Co., Ltd. | The 1500–2100mm PVC Cast Film Machine (4-Shaft Winder) is a robust solution built for indus... |
 |
Standard Washer 12/15/20/25kg | Seller: Jiangsu Chuandao Intelligent Equipment Co., Ltd. | Kingstar Series washer extractors equipped with the world’s leading washing technology, Ita... |
 |
Daily Necessities Molds | Seller: Zhuozhou Yihua Mould Factory | Daily Plastic Products are the most extensive category of plastic products. Most of the plastic p... |
 |
Rebar Coupler Threading Machine | Seller: Xingtai Yushi Machinery Equipment Co., Ltd | Rebar Coupler Threading Machineis an essential tool for processing reinforced bars, commonly used... |
 |
VH HIGH-SPEED GANTRY PROCESSING | Seller: Ling Yueyang International Trade (Shenzhen) Co., Ltd | ●Powerful cutting capability combined with high precision and performance makes insert and armori... |
