Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02
During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all defects.
The cause of the cracks in the bearing rings is complicated. From the raw materials to the finished products of the ferrules, if the process is not proper, the cracks may be directly caused or the hidden cracks may be buried for the occurrence of the lap ring grinding cracks.
There are many ways to form cracks in bearing rings: Raw material defects include: cracks in raw materials and the effects of raw material defects on the grinding process.
Forging defects include forging cracks, effects of forged microstructure defects on the grinding process, and cutter cracks. There are also various heat treatment defects and the like. Therefore, crack detection and hardness testing are essential. BKN has considerable experience in crack detection, and Bearing Ring Crack and Hardness Combination crack testing equipment is a perfect combination.
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 Brief Introduction
Detection process
Vibrating plate and string charging →hardness test→crack detection→automatic blanking
Bad product sorting
Automatic charging —automatic detection—automatic sorting —automatic blanking
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02.jpg
Charging mechanism
Bearing Ring-Crack and Hardness Combination Flaw Detector TQJC-02.jpg
Hardness testing
Bearing Ring Crack and Hardness-Combination Flaw Detector TQJC-02.jpg
Crack detection(the probe uses stainless steel casing+nano abrasion material ) to ensure long-term normal of the probe
Bearing Ring Crack and Hardness Combination-Flaw Detector TQJC-02.jpg
Discharging sequencing mechanism
Crack sensitivity: a crack with a depth of ≥0.05 mm and a length of ≥1 mm extending inward from the surface of the ferrule; for a crack that has not extended to the surface inside the ferrule, when the thickness between the subcutaneous surface and the surface of the workpiece is ≤0.2 mm, the depth is ≥0.20 mm Cracks of length ≥ 1 mm can be detected.
Hardness sensitivity: Rockwell 1HRC ~ 2HRC (other parameters remain stable and consistent).
Eddy Current Testing Equipment
ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.
Why BKN NDT Testing Equipment
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech non destructive testing equipment suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
Send product request
Other supplier products
 |
Wireless Transmission Steel Bar Ultrasonic Flaw Detector | Steel bar is a conventional product with high density, moderate noise. The system is suitable for the automatic detection of internal and external ... |
 |
EDM Notch | Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current weld inspectionis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless... |
 |
EDM Notch | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
 |
Eddy Current Testing for Auto Parts | NDT Application in Automotive Industry: Eddy current hardness testingtechnology has been widely used in the detection of metal components in the... |
Same products
 |
LM-79 Moving Detector Goniophotometer (Mirror Type C) | Seller: LISUN ELECTRONICS (SHANGHAI) CO.,LTD | Measurement:Luminous Intensity Data, Photometric Data, Luminous Intensity Distribution, Zonal Lum... |
 |
HB Series | Seller: Shanghai Kinglos Musical Instruments Co., Ltd. | Personalized Violin Violin with carving flower, your personalized violin. Top: spruce. Back/Side... |
 |
Beginner Violin | Seller: Shanghai Kinglos Musical Instruments Co., Ltd. | Good Beginner Violin Face material: Solid Spruce Back / Side: Maple Fingerboard material: ... |
 |
Advance Series | Seller: Shanghai Kinglos Musical Instruments Co., Ltd. | Professional Violin Professional performance violin with high cost performance. Maple texture... |
 |
Acoustic Violin | Seller: Shanghai Kinglos Musical Instruments Co., Ltd. | The semi acoustic violinproduced by kinglos have good quality, many varieties and complete specif... |
