UHMWPE Molded Sheet
UHMWPE Molded Sheet
Molded UHMWPEsheets find extensive use in a wide range of industries, including automotive, food processing, packaging, marine, construction, and transportation. They are commonly utilized for applications such as wear strips, guide rails, liners, slide plates, bumpers, and various structural components.
Mechanical Properties of UHMWPE Molded Sheet
Indications name |
Unit |
Test method |
Indicators |
Density |
g/cm³ |
ASTM1505 |
|
Fracture strength |
Mpa |
D638 |
42 |
Elongation at break |
% |
D638 |
350 |
Impact strength |
Kj/m² |
D256 |
≥100 |
Types and Specifications of UHMWPE Molded Sheet
Boards: have molded plate and extrusion plate two class.
The name of the project |
Unit |
The shape size (length*width*thickness) |
Remarks |
|
Moulded board |
mm |
4200*1035 (6-200) |
||
mm |
4200*1250 (6-180) |
|||
mm |
3150*2040 (6-150) |
|||
Extrusion board |
mm |
Width 113*thickness 3*unlimited length |
||
mm |
Width1030*thickness 6*unlimited length |
Features of UHMWPE Molded Sheet
UHMWPE plasticis a thermoplastic engineering plastic, which integrates the superior properties of all plastics. The five characteristics of impact resistance, wear resistance, chemical corrosion resistance, self-lubrication and impact absorption performance are the highest values of all existing plastics at present.
Cold tolerance:
UHMWPE can even act in liquid nitrogen or liquid nitrogen, its use temperature can reach below -269 ℃, still has a certain mechanical strength.
Wear resistance:
UHMWPE has excellent wear resistance, the higher the molecular weight, the better the wear resistance of the material.
Bibulous rate:
UHMWPE has very low water absorption.
Excellent resistance to chemical corrosion properties:
UHMWPE chemical stability is very high, in a certain temperature, concentration range can resist acid, alkali, salt and other corrosive media.
UHMWPE tasteless, non-toxic, odorless, no corrosive in itself. The US food and drug administration(FDA) and the United States department of agriculture (USDA) allows it for special occasions in contact with the food and drug. Therefore, UHMWPE is suitable for food, medicine and other industies with higher requirements for hygiene conditions.
If you want to know more kinds of uhmw polyethylene tube, please visit our website.
Send product request
Other supplier products
UHMWPE Bridge Bearing Plate | UHMWPE slide plate is a new polymer wear-resistant material specially developed by Xinrui for bridge bearings. As a professional ultra high molecul... | |
PTFE Molded Rods | PTFE Molded Rods In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic com... | |
Self Adhesive PTFE Sheet | Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nan... | |
PTFE Molded Rods | In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection... | |
UHMWPE Extrusion Sheet | UHMWPE PlasticExtrusion Sheet is known for its unique combination of properties. It has a low coefficient of friction, making it ideal for applicat... |
Same products
Medical Plastic Parts | Seller: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... | |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... | |
PA66 GF | Seller: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... | |
Nylon6 PA6 | Seller: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |