Conveyor belt repair
Conveyor belt repair
1.Conveyor belt damaged parts grinding
Dipute builders grind the damaged parts with angle grinder. (above photo)
First, mark the damaged parts, then grind the damaged parts with L1202 angle grinder and tungsten carbon disc until the damaged surface has a certain radian and non convex.
2. Coat the damaged parts with cold vulcanizing glue.
After grinding conveyor belt, cleaning the damaged parts is necessary, deeply clean the damaged parts with cleaning solvent SK353. ( above photo)
Dipute builders mix the cold vulcanizing glue SK811 with hardener UT-R40, their mixing ratio is 10:1.( above photo)
Dipute builders coat the semi-cured repair strip with cold vulcanizing glue. ( above photo)
Clean the damaged parts, then coat it with cold vulcanizing glue SK811 with hardener UT-R40 mixture. After totally dry, then coat the mixture again, wait they have little stickness but not attached to finger back. However, coat the repair strip once only.
3. Repair strip bonding
After applying repair strip to conveyor belt, construction builders is now use roller stitcher. (above photo)
Conveyor belt damaged parts apply Dipute cold vulcanizing system to finish repair.(above photo)
Bonding repair patches to damaged parts. During the bonding procedure avoid air entering, then use roller stitcher to press repair strip to exhaust air.
Send product request
Other supplier products
 |
Belt repair glue SK811 | Belt repair glue SK811 When conveyor belt running for a long time, whose surface will be partly damaged, however, we should not regardless this dam... |
 |
Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ? | Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ? If we don't roughten repair strip , could it be bo... |
 |
Ramimtech repair strip | Ramimtechrepair strip Ramimtech repair strip is a special material for conveyor belt repair, which is suitable for conveyor belt surface damage, sc... |
 |
What glue do we need when do conveyor belt fast repair? | What glue do we need when do conveyor belt fast repair? Conveyor belt body is easy to be damaged in its running. it will have risks of being crashe... |
 |
RAMIMTECH wear-resisting rubber sheet | RAMIMTECH wear-resisting rubber sheet RAMIMTECH wear-resisting rubber sheet is used for lagging for conveyor belt drive drum , vibrator feeder, chu... |
Same products
 |
Thermoset Molding | Seller: WIT MOLD LIMITED | Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc... |
 |
UNSCREWING MOLDS | Seller: WIT MOLD LIMITED | UNSCREWING MOLDS Unscrewing moldis a type of mold used in injection molding, primarily for produ... |
 |
dsa anode | Seller: mmo ribbon anode | dsa anode DSA Anode , also known as dimensionally stable anodes, are titanium or niobium su... |
 |
mmo electrode | Seller: mmo ribbon anode | mmo electrode MMO Electrode is the process of using electricity to break down water into hy... |
 |
anode for printed circuit board | Seller: mmo ribbon anode | anode for printed circuit board Acid electrolytic copper plating is an important step in t... |
