Conveyor belt repair
Conveyor belt repair
1.Conveyor belt damaged parts grinding
Dipute builders grind the damaged parts with angle grinder. (above photo)
First, mark the damaged parts, then grind the damaged parts with L1202 angle grinder and tungsten carbon disc until the damaged surface has a certain radian and non convex.
2. Coat the damaged parts with cold vulcanizing glue.
After grinding conveyor belt, cleaning the damaged parts is necessary, deeply clean the damaged parts with cleaning solvent SK353. ( above photo)
Dipute builders mix the cold vulcanizing glue SK811 with hardener UT-R40, their mixing ratio is 10:1.( above photo)
Dipute builders coat the semi-cured repair strip with cold vulcanizing glue. ( above photo)
Clean the damaged parts, then coat it with cold vulcanizing glue SK811 with hardener UT-R40 mixture. After totally dry, then coat the mixture again, wait they have little stickness but not attached to finger back. However, coat the repair strip once only.
3. Repair strip bonding
After applying repair strip to conveyor belt, construction builders is now use roller stitcher. (above photo)
Conveyor belt damaged parts apply Dipute cold vulcanizing system to finish repair.(above photo)
Bonding repair patches to damaged parts. During the bonding procedure avoid air entering, then use roller stitcher to press repair strip to exhaust air.
在线联系供应商
Other supplier products
 |
what is the function of conveyor belt repair strip? | what is the function of conveyor beltrepair strip? Conveyor belt surface would be partly damaged by ore or other hard objects after long time runni... |
 |
Ramimtech repair strip | what kind of glue we should use when bond metal drum with rubber? when we do pulley lagging , we need bond metal surface of pulley with rubber shee... |
 |
Ramimtech repair strip | Ramimtechrepair strip Ramimtech repair strip is a special material for conveyor belt repair, which is suitable for conveyor belt surface damage, sc... |
 |
Conveyor belt repair glue- choose belt glue SK313 | Conveyor belt repair glue- choose belt glue SK313When choose glue for repairing belt, not only we have to choose stable, high intensive, easy brush... |
 |
what adhesive is better for conveyor belt bonding? | what adhesive is better for conveyor belt bonding? The most important point to choose conveyor belt adhesive is the bonding strength , High streng... |
